DIN/EN/ISO Test Standards
About DIN/EN/ISO Test Standards
ASO Laboratory is your competent partner for accredited materials testing according to DIN, DIN EN and DIN EN ISO standards and company standards. With our DAkkS accreditation according to DIN EN ISO/IEC 17025, we ensure standards-compliant and internationally recognized test results for the automotive supply industry.
We currently offer testing according to 71 DIN/EN/ISO standards. The most frequently requested test methods are: fogging behavior (2×), liquid resistance (2×), degree of change of black surfaces (1×), color measurement (1×), moisture content and thickness swelling (1×).
All DIN/EN/ISO Standards at a Glance (71)
| Standard | Test Method |
|---|---|
| DIN 34804 | Degree of change of black surfaces |
| DIN 5033-3 | Color measurement |
| DIN 52351 | Moisture content and thickness swelling |
| DIN 53100 | Galvanic coatings on plastics |
| DIN 53351 | Continuous folding behavior |
| DIN 53359 | Continuous kink test |
| DIN 53512 | Rebound resilience |
| DIN 53579 | Indentation test (hardness) |
| DIN 53892-2 | Dimensional change of fabrics |
| DIN 53931 | Mold resistance |
| DIN 54345-1 | Electrostatic behavior |
| DIN 5510-2 | Burning behavior |
| DIN 55662 | Resistance to pressure water jet |
| DIN 60900-1 | Yarns – Definitions |
| DIN 6174 | CIELAB color measurement |
| DIN 6175-1 | Color tolerances paints |
| DIN 67530 | Gloss measurement according to standard |
| DIN 75201-A | Fogging behavior |
| DIN 75201-B | Fogging behavior |
| DIN 75202 | Light fastness |
| DIN 75220 | Solar simulation |
| DIN EN 12540 | Discontinuities in chromium coatings |
| DIN EN 13130-4 | 1,3-butadiene in plastics |
| DIN EN 15336 | Creep resistance of bonding |
| DIN EN 20811 | Textiles – Determination of water pressure |
| DIN EN 22313 | Crease recovery |
| DIN EN 29073-1 | Determination of mass per unit area |
| DIN EN 310 | Bending test wood |
| DIN EN 323 | Density wood |
| DIN EN 3665 | Filiform corrosion aluminum |
| DIN EN 60068-2-38 | Composite test temperature/humidity cyclic |
| DIN EN 60068-2-78 | Damp heat test |
| DIN EN 60695-2-12 | Glow-wire test |
| DIN EN ISO 105-B06 | Color fastness xenon test |
| DIN EN ISO 105-E01 | Color fastness to water |
| DIN EN ISO 105-E04 | Color fastness to perspiration |
| DIN EN ISO 11357-1 | DSC |
| DIN EN ISO 11357-3 | Melting and crystallization temperature |
| DIN EN ISO 11640 | Rub fastness leather |
| DIN EN ISO 12945-2 | Lint and pilling formation |
| DIN EN ISO 12947-1 | Abrasion resistance |
| DIN EN ISO 13938-1 | Bursting behavior textile |
| DIN EN ISO 1518 | Scratch test |
| DIN EN ISO 15184 | Pencil hardness of coatings |
| DIN EN ISO 1520 | Cupping test |
| DIN EN ISO 16925 | Pressure water jet test |
| DIN EN ISO 20567-1 | Stone chip test |
| DIN EN ISO 2060 | Yarn fineness |
| DIN EN ISO 2062 | Maximum tensile force and maximum tensile elongation |
| DIN EN ISO 2177 | Coating thickness of metallic coatings |
| DIN EN ISO 2178 | Coating thickness |
| DIN EN ISO 23910 | Stitch tear-out force |
| DIN EN ISO 2808 | Coating thickness paint |
| DIN EN ISO 2810 | Natural weathering |
| DIN EN ISO 2812-3 | Liquid resistance |
| DIN EN ISO 2812-4 | Liquid resistance |
| DIN EN ISO 3231 | Resistance to SO2 |
| DIN EN ISO 3668 | Visual comparison of color of coatings |
| DIN EN ISO 4628-1 | Assessment of coating defects |
| DIN EN ISO 4628-2 | Degree of blistering |
| DIN EN ISO 4628-3 | Rust formation |
| DIN EN ISO 4628-4 | Degree of cracking |
| DIN EN ISO 4628-8 | Delamination and corrosion (undercutting) |
| DIN EN ISO 5084 | Thickness of textiles |
| DIN EN ISO 5402 | Flexural strength flexometer |
| DIN EN ISO 6860 | Mandrel bend test |
| DIN EN ISO 9237 | Air permeability |
| DIN IEC 60093 | Electrical resistance |
| DIN ISO 1431-1 | Resistance to ozone cracking |
| DIN ISO 1628-5 | Viscosity number |
| DIN ISO 815 | Compression set |
Why ASO Laboratory for DIN/EN/ISO Standards?
- DAkkS-accredited according to DIN EN ISO/IEC 17025
- 50+ specialist experts for plastics, paint and surface testing
- Fast turnaround times – results often within one week
- Comprehensive consultation – from sample planning to result interpretation
Contact us for an individual quote for your DIN/EN/ISO testing.