Standards Overview
OEM Standards
BMW
| Standard No. | Standard Title |
|---|---|
| AA-0026 | Aging Resistance Test |
| AA-0053 | Sunscreen Resistance |
| AA-0055 | Chemical Resistance |
| AA-0061 | Formaldehyde Emission with HPLC |
| AA-0079 | Stone Chip Test (Multi-impact) |
| AA-0101 | Reflectometer Value (Gloss) |
| AA-0134 | Dry Scratch Resistance |
| AA-0136 | Resistance to High-Pressure Water Jet |
| AA-0180 | Cross-Cut Test |
| AA-0203 | Hydrolysis Test |
| AA-0213 | Condensation Constant Climate Test |
| AA-0224 | Cyclic Corrosion Test |
| AA-0236 | Color Fastness with Xenotest |
| AA-0257 | Structure and Gloss on Painted Surfaces |
| AA-0324 | Salt Spray Test |
| AA-0328 | Peel Strength Adhesive Tape |
| AA-0340 | Adhesion Strength via Scalpel Cut |
| AA-0403 | Color Assessment and Metamerism |
| AA-0469 | Corrosion Test Assembly Lubricant |
| AA-0471 | Abrex Abrasion Resistance |
| AA-0570 | Flock Abrasion Resistance |
| AA-C 166 | Emission Test |
| AA-P 276 | Thermal Cycling Test |
| GS 93008-1+2+4 | Hazardous Substances according to GS 93008-1+2+4 |
| GS 93011-2 | Ignition Residue |
| GS 93011-3 | Determination of Extractable Components |
| GS 93011-5 | Cold Reference Value |
| GS 93011-7 | Paint Indifference |
| GS 93026-1 | Requirements for Interior Textiles |
| GS 94007 | Requirements for Painted Plastic Parts |
| GS 94011 | Test Media and Test Aids |
| GS 95003-4 | Climatic Requirements for Electronics |
| GS 95003-5 | Chemical Requirements for Electronics |
| GS 95011-3 | Protective Coating for Electronics |
| GS 95024-3-1 | Environmental Requirements for Electronics |
| GS 97017 | Requirements for Chrome Plating |
| GS 97033 | Requirements for Interior Decorative Trims |
| GS 97034-1 | Abrasion Test |
| GS 97034-10 | Scratch and Abrasion Test |
| GS 97034-2 | Fingernail Test |
| GS 97034-3 | Shoe Sole Test |
| GS 97034-4 | Color Abrasion Behavior |
| GS 97034-5 | Cleaning Agent Resistance |
| GS 97034-6 | Soiling and Cleaning Sensitivity |
| GS 97034-7 | Drop Test |
| GS 97034-8 | Writing Tendency |
| GS 97034-9 | Scratch Test |
| GS 97038 | Flame Retardancy |
| GS 97058 | Requirements for Self-Adhesive Labels |
| PA 0015 | Scratch Resistance |
| PA-P 028 | Cross-Cut Test |
| PA-P 208 | Condensation Constant Climate Test |
| PA-P 295 | Sunscreen Resistance |
| PA-P 315 | Abrasion Test |
| PR 121.2 | Soiling and Cleaning Behavior |
| PR 209 | Requirements for Entry Trim Panel |
| PR 231 | Requirements for Door Seal |
| PR 303.4 | Climatic Cycling Test |
| PR 303.5 | Climatic Cycling Test |
| PR 307.4 | Scratch Sensitivity |
| PR 308.2 | Climatic Cycling Test |
| PR 309 | Vibration Test |
| PR 321.4 | Requirements for Instrument Panel |
| PR 357 | Dimensional Stability Climatic Cycling Test |
| PR 397 | Rot Resistance |
| PR 506 | Fingerprint Test |
| PR 556 | Cream Resistance Thermoplastics |
| PR 557 | Resistance to Media |
| PR 562 | Compatibility with Assembly Aids |
| TP 303.5 | Climatic Cycling Test |
| TP 306.4 | Sun Simulation |
| VDA 278-BMW | TD Analysis of Organic Compounds |
Daimler
| Standard No. | Standard Title |
|---|---|
| DBL 5306 | Interior Trim Materials |
| DBL 5307 | Flame Retardancy |
| DBL 5399 | Soiling and Cleaning Behavior |
| DBL 5400 | Glass Fiber Reinforced Thermosets |
| DBL 5403 | Thermoplastics Engine Compartment |
| DBL 5404 | Thermoplastics Vehicle Interior |
| DBL 5408 | Thermoplastics Engine Air Ducting |
| DBL 5410 | Thermoplastics |
| DBL 5416 | Thermoplastics, exterior application |
| DBL 5420 | Plastic insulating parts |
| DBL 5430 | Interior emission and odor |
| DBL 5450 | PUR foam parts |
| DBL 5462 | Foam parts |
| DBL 5471 | Trim parts |
| DBL 5527 | Contact corrosion |
| DBL 5555 | Polymeric finished parts / semi-finished products |
| DBL 5556 | Elastomer molded parts |
| DBL 5562 | Thermoplastic elastomers |
| DBL 5571 | Elastomer requirements |
| DBL 5573 | Sponge rubber parts |
| DBL 5578 | Elastomers |
| DBL 5620 | Plastic glazing requirements |
| DBL 5816 | Microfiber non-woven fabric and microfiber fabric |
| DBL 5867 | Technical textile requirements |
| DBL 6037 | Elastomer requirements for fuel cells |
| DBL 6038 | O-ring and seal requirements |
| DBL 7382 | Metal part coating |
| DBL 7384 | Plastic part coating |
| DBL 7399 | Coatings |
| DBL 7904 | Bonding requirements |
| DBL 7906 | Self-adhesive component requirements |
| DBL 8459 | Chrome plating requirements |
| DBL 8465 | Chrome plating requirements |
| DBL 8585 | Restricted substance list |
| DBL 9202 | Vehicle interior trim requirements |
| DBL 9455 | Galvanized flat product requirements |
| MBN 10494-5 | Wipe scratch resistance, scratch resistance |
| MBN 10505 | Weathering in humid-warm climate |
| MBN 10506 | Weathering in dry-hot climate |
| PAPP PWT 7329 | Color change in defined amine atmosphere |
| PB VWL 709 | TD analysis of organic compounds |
| PB VWT 217 | Corrosion testing of vehicle interior parts |
| PWT 3668 | Bonding shear strength |
| DBL 1000 | Interior emission and odor |
Fiat
| Standard No. | Description of Standard |
|---|---|
| 50180 | Corrosion testing |
| 50184-B | Environmental simulation |
| 50184-D | Environmental simulation |
| 50424 | Dart drop test |
| 50430/09 | Density |
| 50432/01 | Stress crack resistance |
| 50455/08 | Amine emission |
| 50457 | Gloss |
| 50461 | Cross-cut test |
| 50555 | Bending behavior |
| 50565 | Vicat softening temperature |
| 55231/01 | PC/ABS |
| 7-G2000 | Flammability |
| 7-G2090 | Formaldehyde emission |
| 7-M0001 | Color measurement |
| 7-M0002 | Gloss |
| 7-M0003 | Surface roughness |
| 7-M0005 | Scratch resistance |
| 9.03141/04 | Center console requirements |
| 9.03176/01 | Seat belts |
| 9.55253 | Plastic part requirements |
| 9.55455 | Flock material requirements |
| 9.57413 | Chrome plating requirements |
| MS.90053 | Interior coating requirements |
Ford
| Standard No. | Description of Standard |
|---|---|
| AN 101-01 | Bleeding, sweat, and water staining |
| BI 104-01 | Coating water resistance |
| BI 106-01 | Coating adhesion |
| BI 109-01 | Color comparison |
| BI 113-01 | Water and soap staining |
| BI 113-02 | Acid staining |
| BI 113-06 | Sweat resistance |
| BI 113-08 | Resistance to sunscreen + insect repellent |
| BN 102-01 | Cold flexibility |
| BN 103-01 | Resistance to migration discoloration |
| BN 107-01 | Crockmeter test |
| BN 108-02 | Taber abrasion resistance |
| BN 108-13 | Scratch resistance |
| BN 112-08 | Soiling and cleaning behavior |
| BN 151-05 | Bond adhesion |
| BO 101-05 | Fuel resistance |
| BO 116-01 | Lightfastness |
| BO 127-03 | Stress crack resistance |
| BO 131-01 | Odor |
| BO 131-03 | Odor |
| BO 150-02 | Textile UV Resistance |
| BO 151-01 | Low-Temperature Impact Resistance |
| BO 160-04 | Resistance to High-Pressure Cleaners |
| BO 162-01 | Scratch and Abrasion Resistance |
| BP 101-01 | Ozone Resistance |
| BP 106-03 | Cold Brittleness |
| BU 101-06 | Label Shear Test |
| BU 112-02 | Label Peel Strength |
| BZ 156-01 | Emission Aldehydes and Ketones |
| BZ 157-01 | Emission Organic Compounds |
| DVM-0036-MA | Sunscreen Resistance |
| DVM-0039-MA | Insect Repellent Resistance |
| WSD-M9P8-A | Rubber Part Requirements |
| WSS-M11P65-A | Adhesive Label Requirements |
| WSS-M15P44-B | Carpet Floor Mat Requirements |
| WSS-M15P45-B | Instrument Panel Requirements |
| WSS-M15P4-E | Interior Trim Requirements |
| WSS-M15P4-F | Colored Interior Part Requirements |
| WSS-M15P4-G | Interior Part Requirements |
| WSS-M1P83-D1 | Interior Chrome Plating Requirements |
| WSS-M2D507-A | Thermoplastic Elastomer Requirements |
| WSS-M2D507-B | Thermoplastic Elastomer Requirements |
| WSS-M2P188-B1 | Interior Paint Requirements |
| WSS-M4D729-A3 | PP Requirements, 20% Talc-Filled |
| WSS-M4D729-B2 | PP Requirements, Mineral-Filled |
| WSS-M4D924-B1 | PC/ABS Requirements |
| WSS-M99P2222-D1 | Emission and Allergen Requirements |
| WSS-M99P32-C | Acoustic and Thermal Requirements for Assemblies |
| WSS-M9P8-B | Interior Elastomer Requirements |
GM / Opel
| Standard No. | Description of Standard |
|---|---|
| GM 2617M | Vehicle Interior Trim Part Requirements |
| GM 3602M | Adhesion Tests |
| GM 4486P | Elastomer Ozone Resistance |
| GM 9033P | Color Fastness to Rubbing |
| GM 9070P | Flammability Resistance |
| GM 9150P | Abrasion Resistance |
| GM 9200P | Accelerated Aging |
| GM 9305P | Fogging |
| GM 9505P | Climatic Cycle Test |
| GM 9507P | Fingernail Hardness |
| GM 9515P | Taber Abrasion Resistance |
| GM 9517P | Perspiration Resistance |
| GM 9538P | Weathering |
| GME 12505-1 | Lights and Headlights |
| GME 60276 | Odor |
| GME 60292 | Lightfastness |
| GME 60326-A | Fogging |
| GME 60326-B | Fogging |
| GME 60401 | Cross-Cut Test |
| GMI 60263 | Sulfur Dioxide Resistance |
| GMI 60264 | Hydrogen Sulfide Resistance |
| GMW 14069 | Bleeding and Contact Staining |
| GMW 14093 | Impact Resistance |
| GMW 14102 | Water Spot Sensitivity |
| GMW 14124 | Climatic Cycle Test |
| GMW 14130 | Abrasion Resistance |
| GMW 14131 | Amine Emission |
| GMW 14141 | Color Migration |
| GMW 14147 | Body Sealing Profile Requirements |
| GMW 14162 | Weathering Resistance |
| GMW 14168 | Painted / Flocked Glass Seal Requirements |
| GMW 14169 | Body Sealing Profile Requirements |
| GMW 14170 | Paint Requirements for Seals |
| GMW 14294 | Resistance to Transport Coating (Wax) |
| GMW 14296 | Perspiration Resistance |
| GMW 14334 | Chemical Resistance |
| GMW 14444 | Interior Part Requirements |
| GMW 14445 | Sunscreen/Insect Repellent Resistance |
| GMW 14650 | Exterior Part Requirements |
| GMW 14651 | Monolithic Interior Part Requirements |
| GMW 14668 | Chrome Plating Requirements |
| GMW 14685 | Elastomer Seal Compressibility |
| GMW 14688 | Scratch and Abrasion Resistance |
| GMW 14757 | Elastomer Adhesion |
| GMW 14797 | Painted Plastic Part Requirements |
| GMW 14829 | Cross-Cut Test |
| GMW 14864 | Sulfur Dioxide Resistance |
| GMW 14867 | Interior Paint Requirements |
| GMW 14892 | Interior Composite Part Adhesion Requirements |
| GMW 14914 | Fuel Resistance |
| GMW 15379 | Defrosting Behavior of Sealing Strips |
| GMW 15382 | Joint Strength of Sealing Strips |
| GMW 15564 | Long-term Compression Set of Seals |
| GMW 15634 | Vehicle Interior Emission (TD-GC/MS) |
| GMW 15635 | Emission of Aldehydes and Ketones |
| GMW 15891 | Solvent Resistance of Paint |
| GMW 16853 | Requirements for Vehicle Interior Emission |
| GMW 3205 | Odor |
| GMW 3221 | Conditioning of Organic Materials |
| GMW 3232 | Flame Retardancy |
| GMW 3235-A | Fogging |
| GMW 3235-B | Fogging |
| GMW 3259 | Mold Resistance |
| GMW 3402 | Soiling and Cleaning Sensitivity |
| GMW 6992 | Visual Inspection of Attachments |
| GMW 8081 | Vehicle Interior Emission (GC/MS) |
Honda
| Standard No. | Description of Standard |
|---|---|
| HES D 6003 | Burning Behavior |
Hyundai / Kia
| Standard No. | Description of Standard |
|---|---|
| MS 201-02 | Prohibited Substances |
| MS 210-05 | Interior Molded Parts |
| MS 213-57 | Requirements for PP Materials |
| MS 300-08 | Flame Retardancy |
Jaguar / Land Rover
| Standard No. | Description of Standard |
|---|---|
| STJLR.50.5021 | Requirements for Chrome-Plated Metal Parts |
| STJLR.50.5151 | Requirements for Chrome-Plated Plastic Parts |
| STJLR.51.5182 | Requirements for Labels |
| STJLR.51.5222 | Cleaning Agent Resistance |
| STJLR.51.5225 | Requirements for Interior Parts |
| STJLR.51.5229 | Requirements for Vehicle Interior Emission |
| STJLR.51.5241 | Paint Requirements for Exterior Parts |
| STJLR.51.5242 | Paint Requirements for Interior Parts |
| STJLR.51.5262 | Requirements for Plastic Parts |
| STJLR.51.5301 | Requirements for Elastomers |
| STJLR.51.5361 | Requirements for Textiles |
| STJLR.51.5381 | Requirements for Painted Interior Parts |
| TPJLR.52.002 | Impact Resistance |
| TPJLR.52.004 | Scratch Resistance |
| TPJLR.52.008 | Cross-Cut Scratch Test |
| TPJLR.52.061 | Paint Adhesion |
| TPJLR.52.105 | Resistance to Car Wash Fluids |
| TPJLR.52.152 | Insect Repellent Resistance |
| TPJLR.52.153 | Sunscreen Resistance |
| TPJLR.52.154 | Fuel Resistance |
| TPJLR.52.155 | Soiling by Liquids |
| TPJLR.52.156 | Sweat Resistance |
| TPJLR.52.205 | Amine Staining |
| TPJLR.52.209 | Migration Staining Resistance |
| TPJLR.52.210 | Cleanability |
| TPJLR.52.252 | Resistance in NSS Salt Spray Test |
| TPJLR.52.351 | Humidity Resistance |
| TPJLR.52.352 | Heat Aging Resistance |
| TPJLR.52.353 | Climatic Cycle Test |
| TPJLR.52.423 | Fiber Surface Damage after UV Test |
| TPJLR.52.451 | Textile Transparency |
| TPJLR.52.458 | Odor |
| TPJLR.52.656 | Hydrolysis Test |
| TPJLR.52.712 | Migration Staining Resistance |
John Deere
| Standard No. | Description of Standard |
|---|---|
| LaN 833 | Requirements for Powder Coating |
| LaN 975 | Tests for Primer and Topcoat |
Nissan
| Standard No. | Description of Standard |
|---|---|
| NES M0094 | Flame Retardancy |
| NES M0131 | Heat Stability (Geometry, Appearance) |
| NES M0132 | Climatic Cycle Test |
| NES M0133 | Chemical Resistance |
| NES M0134 | Ball Drop Test |
| NES M0153 | Climatic Cycle Test |
| NES M0161 | Fogging |
| NES M8020 | Physical Tests on Thermoplastics |
PSA
| Standard No. | Description of Standard |
|---|---|
| B20 0250 | Absence of Harmful Substances |
| B62 0300 | Requirements for Thermoplastics, Thermosets + Elastomers |
| D10 5496 | Volatile Amines in PU |
| D40 5535 | Formaldehyde and Carbonyl Emission with HPLC |
| D41 1029 PSA | Tensile Strength |
| D41 1065 PSA | Tensile Strength after Threadless Stitching |
| D41 1126 PSA | Tear Strength |
| D41 5225 | Tensile shear strength |
| D45 1010 | Rub fastness |
| D45 1139 PSA | Thermal stability (geometry, appearance) |
| D45 1195 PSA | Thickness and compressibility |
| D45 1225 PSA | Volatility of additives |
| D45 1234 PSA | Heat aging |
| D45 1333 PSA | Burning behavior |
| D45 1601 PSA | Volatility of additives |
| D45 1727 PSA | Fogging |
| D47 1005 | Water spotting |
| D47 1217 | Resistance to microorganisms |
| D47 1309 | Climatic cycle test |
| D51 1485 | 90° peel test |
Porsche
| Standard No. | Description of Standard |
|---|---|
| PN 1004 | Environmental compatibility |
| PN 705 | Requirements for elastomers |
| PN 707-2 | Requirements for sealing rings |
| PN 710 | Definition of test media |
| PN 780 | Vehicle interior emissions |
| PPV 4014 | Weathering |
| PPV 4015 | Climatic cycle test |
| PPV 4022 | Limitation of surface defects in interior |
| PPV 4023 | Limitation of surface defects in sealing elements |
| PPV 8042 | TD analysis of organic compounds |
| PTL 10105 | Evaluation after artificial weathering |
| PTL 14045 | Residual contamination analysis |
| PTL 4012 | Requirements for adhesive labels |
| PTL 4025 | Requirements for chrome plating |
| PTL 4061 | Requirements for slide-coated seals |
| PTL 4401 | Electrical volume resistance |
| PTL 5524 | Paint requirements for exterior parts |
| PTL 5536 | Paint requirements for interior |
| PTL 5538 | Paint requirements for interior |
| PTL 5805 | Requirements for transport protection films |
| PTL 7520 | Paint requirements for powder coating |
| PTL 7534 | Requirements for duplex coating |
| PTL 8110 | Requirements for insulation material |
| PTL 8127-1 | Requirements for non-woven fabric |
| PTL 8501 | Flame retardancy |
| PV 3983 | Media resistance |
| VW 50002 | Definition of test media |
| VW 50014 | Requirements for interior parts |
Renault
| Standard No. | Description of Standard |
|---|---|
| D17 1058 | Salt spray |
| D41 1029 | Tensile strength |
| D41 1065 | Tensile strength after stitchless joining |
| D41 1126 | Tear strength |
| D45 1047 | Scratch resistance |
| D45 1139 | Thermal stability (geometry, appearance) |
| D45 1195 | Thickness and compressibility |
| D45 1225 | Volatility of additives |
| D45 1333 | Burning behavior |
| D45 1727-A | Fogging |
| D45 1727-B | Fogging |
Saab
| Standard No. | Description of Standard |
|---|---|
| STD 1082 | Fogging |
| STD 2241 | Moisture resistance |
| STD 3159 | UV resistance |
| STD 3816 | Environmental simulation evaluation |
| STD 3907 | Climatic cycle test |
| STD 501 | Chemical resistance |
Scania
| Standard No. | Description of Standard |
|---|---|
| STD 4466 | Burning behavior of materials |
| TB4087 | Requirements for painted front surfaces |
Suzuki
| Standard No. | Description of Standard |
|---|---|
| SES N 3211b | Requirements for PP materials |
| SES N 3245 | Flame retardancy |
| SES N 3253 | Corrosion effects of textile materials |
| SES N 3291a | Test methods for plastics |
Toyota
| Standard No. | Description of Standard |
|---|---|
| TSH 1503G | Paint adhesion |
| TSH 1508G | Solvent resistance of paint |
| TSH 1509G | Chemical resistance of paint |
| TSH 1539G | Paint hardness test |
| TSH 3130G | Paint requirements for interior parts |
| TSM 0500G | Burning behavior |
| TSM 5754G | Thermoplastics for vehicle interior |
VW / Audi
| Standard No. | Description of Standard |
|---|---|
| TL 226 | Paint requirements for interior parts |
| PV 1015 | Electrical Volume Resistivity |
| PV 1200 | Climatic Cycle Test |
| PV 1210 | Corrosion Test |
| PV 1300 | Thermal Stability PVC |
| PV 1303 | Lightfastness |
| PV 1306 | Tackiness |
| PV 1323 | UV Resistance Suntest |
| PV 1502 | Crack Resistance Clear Coat |
| PV 1503 | Coating of Metallic and Non-Metallic Materials - Steam Jet Test |
| PV 2005 | Climatic Cycle Test |
| PV 2034 | Roller Peel Test |
| PV 3015 | Fogging |
| PV 3305 | Ozone Resistance |
| PV 3307 | Plastic/Elastic Deformability |
| PV 3339 | Deposits in Coolant Hoses |
| PV 3341 | Emission of Organic Compounds |
| PV 3353 | Soiling and Cleaning Behavior |
| PV 3355 | Contact Heat Aging |
| PV 3356 | Soiling and Cleaning Behavior |
| PV 3410 | Testing of PUR Flexible Foam |
| PV 3900 | Odor |
| PV 3905 | Falling Ball Test |
| PV 3906 | Abrasion Resistance |
| PV 3907 | Brush Abrasion Test |
| PV 3919 | Compression Hardness of Non-woven Damping Material |
| PV 3920 | Fogging |
| PV 3922 | Oil and Water Repellent Behavior |
| PV 3925 | Formaldehyde Emission |
| PV 3927 | Identification Test with Thermogravimetry |
| PV 3929 | Weathering Dry-Hot (Arizona Test) |
| PV 3930 | Weathering Humid-Warm (Florida Test) |
| PV 3932 | Flocked Plastic Parts - Abrasion Resistance |
| PV 3937 | Amine Emission |
| PV 3939 | Extractable Components |
| PV 3944 | Amine Discoloration Sun Visor |
| PV 3952 | Scratch Resistance |
| PV 3954 | Flexural Rigidity ZSB Floor Covering |
| PV 3959 | Hydrolysis Test |
| PV 3960 | Indentation Measurement (Hardness) |
| PV 3962 | Scratch Resistance Metal Seals |
| PV 3964 | Sunscreen Resistance |
| PV 3965 | Visual Comparison of Decorative Surfaces |
| PV 3966 | Stress Whitening (Falling Ball) |
| PV 3971 | Falling Ball Test |
| PV 3974 | Marking Resistance |
| PV 3975 | Scrub Resistance High-Gloss Surfaces |
| PV 3976 | Corrosion of Copper by Elastomers |
| PV 3987 | Micro-Scratch Resistance |
| TL 1010 | Flame Retardancy |
| TL 1011 | Vertical Flame Retardancy |
| TL 207 | Requirements for Reflective Layers |
| TL 211 | Coating Requirements for Exterior Parts |
| TL 227 | Coating Requirements for Metal Surfaces |
| TL 244 | Requirements for Zn/Ni Surfaces |
| TL 292 | Requirements for PVC Film |
| TL 496 | Requirements for Door/Side Trim |
| TL 52007 | Requirements for Hot Stamping Foils |
| TL 52013 | Requirements PPE+PS |
| TL 52018 | Requirements for Foam Adhesive Tape |
| TL 52035 | Requirements PP/EPDM/PE |
| TL 52038 | Requirements for Adhesive Labels |
| TL 52045 | Requirements for PUR Steering Wheel Foam |
| TL 52062 | Requirements PA 6.6, GF-reinforced |
| TL 52064 | Requirements for Leather |
| TL 52065 | Requirements for Elastomer Seals |
| TL 52068 | Requirements for EPDM Coolant Hose |
| TL 52090 | Requirements PP-EPDM, GF-reinforced |
| TL 52217 | Aging Behavior of Exterior Parts |
| TL 52221 | Requirements for PP |
| TL 52223 | Requirements for Adhesive Tape for TPE/Elastomer |
| TL 52226 | Requirements for Headliner |
| TL 52231 | Requirements for PC/ABS |
| TL 52254 | Requirements for Foam-Laminated Knitted Fabric |
| TL 52277 | Requirements for POM Finished Parts |
| TL 52278 | Requirements for Rubber Floor Mat |
| TL 52283 | Requirements for Polypropylene |
| TL 52288 | Requirements PA, Mineral-Reinforced |
| TL 52296 | Requirements for Instrument Panel |
| TL 52306 | Requirements for Carpet |
| TL 52311 | Requirements for ASA Graft Polymer |
| TL 52320 | Requirements for Damping Film |
| TL 52321 | Requirements for Wooden Parts |
| TL 52345 | Requirements for EPDM Body Seals |
| TL 52350 | Requirements for Convertible Top Fabric |
| TL 52361 | Requirements for Coolant Hose with Aramid |
| TL 52388 | Requirements for PP |
| TL 52394 | Requirements for Melamine Resin Foam |
| TL 52419 | Requirements for PP Film Scuff Guard |
| TL 52428 | Decorative Film with Protective Function - Component Requirements |
| TL 52437 | Requirements for Headlight Covers PC |
| TL 52439 | Requirements for PA Pipe |
| TL 52440 | Requirements for PA 6, GF-reinforced |
| TL 52442 | Requirements for Floor Covering |
| TL 52447 | Flocking of Interior Trim Materials |
| TL 52449 | Requirements for Non-woven Fabric-Foam Flake Composite |
| TL 52452 | Requirements for PP |
| TL 52473 | Requirements for Sun Visor |
| TL 52476 | Requirements for POM |
| TL 526 | Requirements for Soft PVC |
| TL 52602 | Requirements for PU Foam |
| TL 52607 | Requirements for PUR Inserts |
| TL 52608 | Requirements for Fine Fiber Fleece |
| TL 52613 | Requirements for PET Fleece Absorber |
| TL 52622 | Thermoplastic Elastomers for Exterior Applications |
| TL 52625 | Requirements for Plastic Mounting Brackets |
| TL 52631 | Requirements for Bumpers and Spoilers |
| TL 52637 | Requirements for Pillar Trim/Door Sill Plate |
| TL 52639 | Requirements for PP |
| TL 52649 | Requirements for Wheel Arch Liners |
| TL 52652 | Requirements for ASA-PC |
| TL 52653 | Requirements for PU Soft Foam |
| TL 52660 | Requirements for Underbody Application |
| TL 52663 | Requirements for Radiator Grille |
| TL 52671 | Requirements for PMMA Bezels |
| TL 52673 | Requirements for ASA+PA |
| TL 52681 | Requirements for Fuel Filler Neck |
| TL 52682 | Requirements for Coolant-Carrying Components |
| TL 52685 | Requirements for Polyether-PUR Lightweight Foam |
| TL 52690 | Requirements for PP Exterior Parts |
| TL 52693 | Requirements for Floor Mat |
| TL 52694 | Requirements for Corrugated Pipe |
| TL 527 | Requirements for ABS |
| TL 52703 | Requirements for TPE Seals |
| TL 52704 | Requirements for EPDM Seals |
| TL 52705 | Polypropylene with Soft-Touch Feel for Interior |
| TL 528 | Requirements for Chrome Plating |
| TL 529/2 | Requirements for PUR |
| TL 533 | Requirements for Rigid PE |
| TL 533/1 | Requirements for PE Containers |
| TL 554 | Requirements for PET Resin, Glass Fiber Reinforced |
| TL 591 | Requirements for Organic Glasses for Lights |
| TL 669 | Requirements for PE Finished Parts |
| TL 778 | Requirements for Low-Temperature Grease |
| VW 2.8.1 | Requirements for Elastomers |
| VW 44045 | Requirements for PP |
| VW 50105 | Requirements for Upholstery Fabrics |
| VW 50106 | Requirements for Sewing and Embroidery Thread |
| VW 50123 | Requirements for TPE |
| VW 50125 | Polyamide 6 for Finished Parts of Vehicle Interior |
| VW 50127 | Polyamide 66 for Finished Parts of Vehicle Interior |
| VW 50129 | Requirements for Slide-Coated Seals |
| VW 50131 | Adhesion Requirements for Damping Materials |
| VW 50133 | Requirements for PA 66 Vehicle Exterior |
| VW 50134 | Requirements for PA 6 Vehicle Exterior |
| VW 50180 | Requirements for Vehicle Interior Emissions |
| VW 50181 | Fogging Behavior |
| VW 50185 | Outdoor Weathering Resistance |
| VW 50190 | Colorimetric Assessment |
| VW 80101 | Requirements for Vehicle Electronics |
| VW 91101 | Pollutant Avoidance |
Volvo
| Standard No. | Description of Standard |
|---|---|
| STD 1024,3216 | Recovery Temperature after Freezing |
| STD 1026,8201 | Color Fastness: Grey Scale |
| STD 1027,3231 | Ozone Resistance |
| STD 104-0001 | Flame Retardancy |
| STD 1228,16 | Requirements for Cellular Rubber |
| STD 412-0001 | Requirements for Rubber |
| STD 420-0003 | Fogging |
| STD 423-0030 | Scratch Resistance |
| STD 423-0037 | Color Fastness to Rubbing |
| STD 429-0001 | Odor |
| STD 429-0002 | Formaldehyde Emission |
| STD 429-0003 | Organic Compound Emission |
| TC 80000003 | Soiling and Cleaning Sensitivity |
| VCS 1021,29 | Scribing and Scratch Evaluation of Paint |
| VCS 1021,52119 | Requirements for Test Panels |
| VCS 1024,11159 | Compression Set of Cellular Rubber |
| VCS 1024,31139 | Scratch Resistance (Erichsen) |
| VCS 1024,7136 | Stone Chip Test |
| VCS 1026,51729 | Color Assessment |
| VCS 1026,52729 | Gloss |
| VCS 1026,81779 | Chemical Resistance |
| VCS 1026,84329 | Color Fastness to Rubbing |
| VCS 1027,0519 | Blistering Degree |
| VCS 1027,1449 | Accelerated Corrosion Test |
| VCS 1027,2719 | Fogging |
| VCS 1027,2729 | Odor |
| VCS 1027,2739 | Formaldehyde Emission |
| VCS 1027,2749 | Organic Compound Emission |
| VCS 1027,2759 | Determination of Volatile Organic Compounds |
| VCS 1027,32319 | Ozone Resistance |
| VCS 1027,33719 | Climatic Aging |
| VCS 1027,33759 | Cyclic Climatic Aging |
| VCS 1029,54719 | Resistance to High-Pressure Water Jet |
| VCS 1029,54729 | Cross-Cut Test |
| VCS 1029,54739 | Paint Adhesion |
| VCS 5715,1029 | Rust Formation |
| VCS 5751,59 | Painting Requirements |
| VCS 7411,1719 | Corrugated Pipe Requirements |
DIN and ISO Standards
| Standard No. | Description of Standard |
|---|---|
| LP-463PB-31-01 | Resistance to Liquids |
| 2000/53/EG | Heavy Metal Testing |
| 95/28/EG | Burning Behavior (Horizontal) |
| AATCC 118 | Oil Resistance |
| AATCC 169 | Weather Resistance of Textiles |
| AATCC 22 | Water Resistance |
| AKLV 01 | Airbag System Requirements |
| AKLV 02 | Airbag |
| ASTM B 117 | Salt Spray Test |
| ASTM B 487 | Microscopic Coating Thickness Measurement |
| ASTM B 571 | Adhesion Test of Metal Coatings |
| ASTM D 5034 | Tensile Strength of Fabrics (Grab Test) |
| ASTM D 5733 | Tear Resistance Test of Fabrics |
| ASTM D257 | Electrical Resistance |
| ASTM D2671 | Shrink Tubing Test |
| ASTM D3359 | Adhesion |
| ASTM D4060 | Taber Abrasion Resistance |
| ASTM D5733 | Trapezoidal Tear Strength of Textiles |
| ASTM D903 | Peel Strength of Bonds |
| ASTM G24 | Florida Weathering Test |
| DIN 34804 | Degree of Change of Black Surfaces |
| DIN 5033-3 | Color Measurement |
| DIN 52351 | Moisture Content and Thickness Swelling |
| DIN 53100 | Electroplated Coatings on Plastics |
| DIN 53351 | Folding Endurance |
| DIN 53359 | Crease Resistance Test |
| DIN 53512 | Rebound Resilience |
| DIN 53579 | Indentation Test (Hardness) |
| DIN 53892-2 | Dimensional Change of Fabrics |
| DIN 53931 | Mold Resistance |
| DIN 54345-1 | Electrostatic Behavior |
| DIN 5510-2 | Burning Behavior |
| DIN 55662 | Resistance to High-Pressure Water Jet |
| DIN 60900-1 | Yarns - Definitions |
| DIN 6174 | CIELAB Color Measurement |
| DIN 6175-1 | Color Tolerances for Paints |
| DIN 67530 | Gloss |
| DIN 75201-A | Fogging Behavior |
| DIN 75201-B | Fogging Behavior |
| DIN 75202 | Light Fastness |
| DIN 75220 | Solar Simulation |
| DIN EN 12540 | Discontinuities in Chromium Coatings |
| DIN EN 13130-4 | 1,3-Butadiene in Plastics |
| DIN EN 15336 | Creep Rupture Strength of Adhesions |
| DIN EN 20811 | Hydrostatic Pressure Test |
| DIN EN 22313 | Crease Recovery |
| DIN EN 29073-1 | Determination of Mass Per Unit Area |
| DIN EN 310 | Wood Bending Test |
| DIN EN 323 | Wood Bulk Density |
| DIN EN 3665 | Filiform Corrosion Aluminum |
| DIN EN 60068-2-38 | Cyclic Temperature/Humidity Composite Test |
| DIN EN 60068-2-78 | Constant Damp Heat Test |
| DIN EN 60695-2-12 | Glow-Wire Test |
| DIN EN ISO 105-B06 | Color Fastness Xenotest |
| DIN EN ISO 105-E01 | Color Fastness to Water |
| DIN EN ISO 105-E04 | Color Fastness to Perspiration |
| DIN EN ISO 11357-1 | DSC |
| DIN EN ISO 11357-3 | Melting and Crystallization Temperature |
| DIN EN ISO 11640 | Leather Rub Fastness |
| DIN EN ISO 12945-2 | Lint and Pilling Formation |
| DIN EN ISO 12947-1 | Abrasion Resistance (Martindale) |
| DIN EN ISO 13938-1 | Bursting Behavior of Textile Fabrics |
| DIN EN ISO 1518 | Scratch Test |
| DIN EN ISO 15184 | Pencil Hardness of Coatings |
| DIN EN ISO 1520 | Cupping Test |
| DIN EN ISO 16925 | Coating materials – Test of resistance of coatings to high-pressure water jet |
| DIN EN ISO 20567-1 | Stone Chip Test |
| DIN EN ISO 2060 | Yarn Fineness |
| DIN EN ISO 2062 | Maximum Tensile Force and Elongation at Maximum Tensile Force |
| DIN EN ISO 2177 | Thickness of Metallic Coatings |
| DIN EN ISO 2178 | Coating Thickness |
| DIN EN ISO 23910 | Seam Strength |
| DIN EN ISO 2808 | Paint Coating Thickness |
| DIN EN ISO 2810 | Outdoor Weathering |
| DIN EN ISO 2812-3 | Resistance to Liquids |
| DIN EN ISO 2812-4 | Resistance to Liquids |
| DIN EN ISO 3231 | Resistance to SO2 |
| DIN EN ISO 3668 | Visual Comparison of the Color of Coatings |
| DIN EN ISO 4628-1 | Assessment of Paint Damage |
| DIN EN ISO 4628-2 | Degree of Blistering |
| DIN EN ISO 4628-3 | Degree of Rusting |
| DIN EN ISO 4628-4 | Degree of Cracking |
| DIN EN ISO 4628-8 | Delamination and Corrosion (Undercutting) |
| DIN EN ISO 5084 | Thickness of Textiles |
| DIN EN ISO 5402 | Flex Resistance (Flexometer) |
| DIN EN ISO 6860 | Mandrel Bend Test |
| DIN EN ISO 9237 | Air Permeability |
| DIN IEC 60093 | Electrical Resistance |
| DIN ISO 1431-1 | Resistance to Ozone Cracking |
| DIN ISO 1628-5 | Viscosity Number |
| DIN ISO 815 | Compression Set |
| ELV/RoHS | RoHS Directive |
| FMVSS 302 | Low Flammability |
| GB 8410 | Low Flammability |
| IEC 60068-2 | inter alia Climatic Change Test |
| ISO 11358 | Thermogravimetry |
| ISO 12097-2 | Testing of Airbag Modules |
| ISO 16750-3 | Mechanical Tests of Electronic Components |
| ISO 16750-5 | Chemical Resistance |
| ISO 1765 | Thickness |
| ISO 3865 | Contact Staining |
| ISO 6452 | Fogging Behavior |
| SAE J1351 | Odor |
| SAE J1756-A | Fogging |
| SAE J1756-B | Fogging |
| SAE J365 | Abrasion Resistance |
| SAE J948 | Abrasion Resistance (Taber) |
| VDA 230-210 | Hook-and-Loop Fastener Test |
| VDA 237-101 | Ball Drop Test |
| VDA 275 | Formaldehyde Emission |
| VDA 277 | Emission of Organic Compounds |
| VDA 278 | TD Analysis of Organic Compounds |
| VDA 280-1 | Color Measurement of Interior Plastic Surfaces |
| VDA 621-408 | Oil Soot Resistance |
| VDA 621-409 | Color Comparison |
| VDA 621-412 | Chemical Resistance |
| VDA 621-415 | Corrosion Protection Test for Paints |
| VDA 675-101 | IRHD Micro Hardness Test |
| VDA 675-102 | Shore Hardness Test |
| VDA 675-116 | Cold Characteristics |
| VDA 675-130 | Ignition Residue |
| VDA 675-135 | TGA Identification |
| VDA 675-140 | FTIR Identification |
| VDA 675-205 | Tensile Test |
| VDA 675-211 | Tear Propagation Test |
| VDA 675-216 | Compression Set |
| VDA 675-217 | Tension Set |
| VDA 675-241 | Copper Corrosion |
| VDA 675-242 | Paint Compatibility |
| VDA 675-310 | Thermal Aging |
| VDA 675-311 | Ozone Resistance |
| VDA 75202 | UV Resistance |
| Webasto MD_122 | Flammability of Materials |
| VDA 270 | Determination of Odor Behavior of Automotive Interior Materials |
Additional Test Specifications
| Standard No. | Description of Standard |
|---|---|
| CMT0021 | Resistance to Operating Fluids |
| KEUR 00821-020 | Dimensional Stability after Heat Aging |
| KEUR 00821-024 | Resistance to Fungal Growth |
| KEUR 00821-025 | Cleanability of Interior Trim |
| KEUR 00822-107 | Lightfastness |
| KEUR 00822-108 | Rubfastness |
| KEUR 00822-115 | Aging Resistance |
| KEUR 00822-116 | Abrasion Resistance |
| KEUR 00822-120 | Fogging Behavior |
| KEUR 00822-122 | Sensitivity to Electrostatic Charge |
| KEUR 00824-101 | Gloss |
| KEUR 00824-110 | Color Comparison |
| KEUR 00824-401 | Cross-Cut Test |
| KEUR 00824-402 | Scratch Resistance |
| KEUR 00824-405 | Stone Chip Test |
| KEUR 00824-825 | Sweat Resistance |
| KEUR 00824-826 | Food Resistance |
| KEUR 00824-827 | Food Resistance |
| KEUR 00824-840 | Condensing Humidity Test |
| KEUR 00824-841 | Salt Spray Test |
| KEUR 00824-843 | Water Storage |
| KEUR 00824-844 | Outdoor Weathering |
| KEUR 00824-846 | Chemical Resistance |
| KEUR 00824-849 | Chemical Resistance |
| LAK 60100 | Exterior Paint Requirements |
| MAT 30341/30349 | ABS Requirements |
| MAT 45606 | Requirements for Grilles with Hot Stamping Foil |
| MAT 53820 | Interior Trim Part Requirements |