Chapter 9: Procedure List Flexible Accreditation
Status: 2025-06-27
No results. Tip: try shorter terms (e.g., "NMR", "DIN 17294", "Medical Technology") or check spelling.
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: NMR Spectroscopy | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/n/001.02 | In-house Method | Determination of preparation orders using the NMR method | Inorganic and Organic Chemicals (Additives) | Chemical Fiber | 2009-05-15 |
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: NMR Spectroscopy | |||||
| Test Scope: Determination of organic and inorganic compounds, polymers, and functional groups containing the elements H, C, N, F, P in chemical products by means of Nuclear Magnetic Resonance Spectroscopy (NMR) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| SP/n/001.08 | In-house Method | Identification and quantification of organic compounds, polymers, and functional groups in chemical products by means of 1H-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 2025-04-22 |
| SP/n/002.06 | In-house Method | Identification of organic compounds, polymers, and functional groups in chemical products by means of 13C{1H}-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 2025-04-22 |
| SP/n/013.04 | In-house Method | Identification of organic and inorganic compounds, polymers, and functional groups in chemical products by means of 31P{1H}- or 31P-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 4/22/25 |
| SP/n/014.06 | In-house Method | Identification and quantification of N,N-Dimethyl-p-toluidine (DMpT) and other organic compounds in Methyl methacrylate (MMA) by means of 1H-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2025-05-12 |
| SP/n/015.05 | In-house Method | Incoming goods inspection by identity control of organic compounds in LPEG 2000 Lipoid or DMPC Lipoid by means of 1H-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2024-09-16 |
| SP/n/016.07 | In-house Method | Incoming goods inspection by identity control of organic compounds in Polyamidamine-Epichlorohydrin (PAE) resins by means of 1H-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2025-05-01 |
| SP/n/017.02 | In-house Method | Suppression of specific signals (e.g., of the solvent) in 1H-NMR spectroscopy for the identification of organic compounds, polymers, and functional groups in chemical products | Inorganic and Organic Chemicals (Additives) | general | 5/28/25 |
| SP/n/018.02 | In-house Method | Identification of organic and inorganic compounds, polymers, and functional groups in chemical products by means of 19F{1H}- or 19F-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 4/22/25 |
| SP/n/019.02 | In-house Method | Quantification of silicone oil content in polycarbonate by means of 1H-NMR spectroscopy | Polymers (Resins; Fibers) | general | 2024-11-04 |
| SP/n/020.02 | In-house Method | Identification of organic and inorganic compounds, polymers, and functional groups in chemical products by means of 15N-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 2025-05-12 |
| SP/n/021.02 | In-house Method | Identity testing of Lipidure AE [(Poly(2-methacryloyloxyethylphosphorylcholine-co-2-aminoethyl methacrylate hydrochloride)), PMPC] by means of 1H-NMR spectroscopy | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2020-05-27 |
| SP/n/022.02 | In-house Method | Absolute quantification and purity determination of organic compounds in their mixtures or in polymers by means of qNMR spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 2025-04-22 |
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: UV-VIS Fluorescence Spectroscopy | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/p/030.01 | In-house Method | Determination of Chromium(â…¥) using the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 2015-06-16 |
| CL/p/038.01 | In-house Method | Quantification of Berol 637, Polyethylene oxide alkylamine (PAM), and Laurylpyridinium chloride (LPC) in ENKA spinning bath | Polymers (Resins; Fibers) | Chemical Fiber | 2021-06-23 |
| CL/p/011.03 | In-house Method | Photometric determination of titanium dioxide in viscose and yarn | Polymers (Resins; Fibers) | Chemical Fiber | 2019-11-11 |
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: UV-VIS Fluorescence Spectroscopy | |||||
| Test Scope: Determination of ingredients, organic and inorganic compounds, and functional groups by means of UV/VIS spectroscopy in chemical raw materials, intermediates, and end products, mineral building materials, composite materials, organic and inorganic coatings, paints, varnishes, adhesives, plastics, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| SP/u/001.05 | In-house Method | Determination of the UV/VIS spectroscopic characteristics of consumer products, chemical raw materials, intermediates, or end products for the purpose of identity testing, material comparison, clarification of damage cases, technical problem solving, or the solution of quantitative or other issues with UV/VIS spectroscopy | Inorganic and Organic Chemicals (Additives) | general | 9/1/24 |
| SP/u/029.04 | In-house Method | Determination of formaldehyde emission from molded parts for vehicle interiors and textile fabrics | Polymers (Resins; Fibers) | Automotive | 2019-05-27 |
| PV 3925 (2009-06): Measurement of formaldehyde emission | |||||
| PV 3925 (2021-01): Measurement of formaldehyde emission | |||||
| VDA 275 (1994-07): Molded parts for vehicle interiors – Determination of formaldehyde emission Measurement method according to the modified flask method | |||||
| Volvo STD 1027,2713 (2007-01): Determination of formaldehyde emission from components in vehicle interiors | |||||
| Volvo STD 1027,2739 (2004-03): Determination of formaldehyde emission from components in vehicle interiors | |||||
| Volvo STD 429-0002 (2005-01): Determination of formaldehyde emission from components in vehicle interiors | |||||
| SP/u/030.03 | In-house method | Determination of thermal and/or oxidative damage of PA66 material using UV/VIS spectroscopy | Polymers (Resins; Fibers) | Chemical fiber | 2024-09-01 |
| SP/u/032.09 | In-house method | UV-VIS spectroscopic determination of chlorophyll in MMA monomer | Polymers (Resins; Fibers) | general | 2023-10-23 |
| CL/p/028.02 | In-house method | Quantitative determination of Chimassorb 944 and Chimassorb 2020 in polyolefins using UV/VIS spectroscopy | Polymers (Resins; Fibers) | Chemical fiber | 2025-06-02 |
| CL/k/007.03 | DIN 5033 Part 3 | Determination of color coordinates (L*; a*; b*) according to the CIELAB formula | Polymers (Resins; Fibers) | general | 2009-03-13 |
| DIN 5033 Part 1 (2017-10): Basic concepts of colorimetry; Colorimetric values | |||||
| DIN 5033 Part 3 (1992-07): Colorimetry - Colorimetric values | |||||
| DIN 5033 Part 7 (2014-10): Measurement conditions for object colors | |||||
| DIN 5033 Part 8 (1982-04): Color measurement; Measurement conditions for light sources | |||||
| DIN 53236 (2018-02): Colorants - Measurement and evaluation conditions for the determination of color differences in coating materials, similar coatings | |||||
| DIN EN ISO/CIE 11664-4 (2020-03): Colorimetry - Part 4: CIE 1976 L*a*b* Color space | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: UV-VIS Fluorescence Spectroscopy | |||||
| Test Scope: Test procedures for the Water specialist module – Sub-area 2: Photometry | |||||
| SAA Number | Standard | Test Procedure | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/p/008.03 | EN ISO 6878 (2004-09) | Photometric determination of total phosphorus according to EN ISO 6878 (D11) | Water | Water | 2014-01-28 |
| CL/p/015.03 | DIN 38405-27 (2017-10) | Determination of readily releasable sulfide | Water | Water | 2024-01-15 |
| CL/p/029.01 | DIN ISO 15923-1 (2014-07) | Determination of chloride according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 2015-06-16 |
| CL/p/031.01 | DIN ISO 15923-1 (2014-07) | Determination of orthophosphate according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 2015-06-16 |
| CL/p/032.01 | DIN ISO 15923-1 (2014-07) | Determination of silicate (molybdate-reactive silicate) according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 6/16/15 |
| CL/p/033.01 | DIN ISO 15923-1 (2014-07) | Determination of sulfate using the turbidimetric measurement method according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 6/16/15 |
| CL/p/034.01 | DIN ISO 15923-1 (2014-07) | Determination of ammonium according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 2015-06-16 |
| CL/p/035.01 | DIN ISO 15923-1 (2014-07) | Determination of nitrite according to DIN ISO 15923-1 with the Gallery Plus single analysis system from Thermo Fisher Scientific | Water | Water | 2015-06-16 |
| CL/p/037.01 | DIN ISO 15923-1 (2014-07) | Photometric determination of nitrate according to DIN ISO 15923-1 | Water | Water | 2018-04-16 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: IR/Raman Spectroscopy | |||||
| Test Scope: Test procedures for the Water specialist module – Sub-area 4/5: Group and sum parameters | |||||
| SAA Number | Standard | Test Procedure | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/i/002.08 | DIN EN 1484:2019-04 (H 3) | TOC, DOC, and TNb in water, wastewater, and sludge samples | Water, Wastewater, Sludge | Water | 2024-01-15 |
| DIN EN 12260: 2003-12 (H 36) Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb) after oxidation to nitrogen oxides | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: IR/Raman Spectroscopy | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Procedure | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/i/001.02 | In-house method | Determination of DIP applications using NIR spectroscopy | Polymers (Resins; Fibers) | Chemical fiber | 2015-02-10 |
| CL/i/004.02 | In-house method | NIR measurements for the identification of preparation base oils | Inorganic and organic chemicals (additives) | Chemical fiber | 2016-04-05 |
| CL/i/006.01 | In-house method | Carboxyl end groups using NIR spectroscopy | Polymers (Resins; Fibers) | Chemical fiber | 2016-06-27 |
| CL/i/007.02 | In-house method | Identification of preparation base oils using NIR | Inorganic and organic chemicals (additives) | Chemical fiber | 2019-11-11 |
| DIN 55673 (2017-04): Coating materials and their raw materials - Near-infrared spectrometric analysis - General working principles | |||||
| CL/i/008.01 | In-house method | Quantification of amino end groups of polyamide 6.6 granules using near-infrared spectroscopy | Polymers (Resins; Fibers) | Chemical fiber | 2017-08-28 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Spectroscopy | |||||
| Test Type: IR/Raman Spectroscopy | |||||
| Test Scope: Determination of organic and inorganic compounds, polymers, and functional groups using infrared spectroscopy / Raman spectroscopy in chemical raw, intermediate, and end products, mineral building materials, composites, organic and inorganic coatings, paints, varnishes, adhesives, plastics, metals and metal alloys, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| SP/i/002.05 | In-house method | FTIR spectroscopic identity testing of PES/SPES | Polymers (Resins; Fibers) | Medical Technology | 5/1/12 |
| SP/i/006.05 | In-house method | Determination of the IR characteristics of organic or inorganic compounds, polymers, functional groups, consumer products, chemical raw materials, intermediates, or end products for the purpose of material identification, material comparison, clarification of damage cases, technical problem solving, or the resolution of analytical issues using IR spectroscopy | Inorganic and organic chemicals (additives) | general | 9/1/24 |
| SP/i/023.04 | In-house method | Determination of the IR characteristics of test specimens or sample material for the purpose of material identification, material comparison, clarification of damage cases, technical problem solving, or the resolution of other analytical issues using the Diamond ATR unit | Inorganic and organic chemicals (additives) | general | 7/25/16 |
| SP/i/027.01 | In-house method | Identity testing of organic or inorganic compounds, polymers, consumer products, chemical raw materials, intermediates, or end products for the purpose of material identification or material comparison using IR spectroscopy and/or Raman spectroscopy | Inorganic and organic chemicals (additives) | general | 6/1/25 |
| SP/r/001.04 | In-house method | Determination of the Raman characteristics of organic or inorganic compounds, polymers, functional groups, consumer products, chemical raw materials, intermediates, or end products for the purpose of material identification, material comparison, clarification of damage cases, technical problem solving, or the resolution of analytical issues using RAMAN spectroscopy | Inorganic and organic chemicals (additives) | general | 9/1/24 |
| SP/r/002.05 | In-house method | Raman spectroscopic determination of the degree of sulfonation in SPES | Polymers (Resins; Fibers) | Medical Technology | 1/16/24 |
| SP/r/003.04 | In-house method | Determination of the micro-Raman characteristics of organic or inorganic compounds, polymers, functional groups, consumer products, chemical raw materials, intermediates, or end products for the purpose of material identification, material comparison, clarification of damage cases, technical problem solving, or the resolution of analytical issues using RAMAN microscopy | Polymers (Resins; Fibers) | general | 9/1/24 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Inorganic analytical test methods; Test methods for solid-state analysis | |||||
| Test Type: Atomic Spectrometry | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/a/001.04 | In-house method | Determination of mercury by atomic fluorescence spectroscopy according to DIN EN ISO 17852 (E 35) | Water | Water | 9/30/14 |
| DIN EN ISO 17852:2008 (E35) Water quality - Determination of mercury - Method by atomic fluorescence spectrometry | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Inorganic analytical test methods; Test methods for solid-state analysis | |||||
| Test Type: Atomic Spectrometry | |||||
| Test Scope: Determination of elements in raw materials, intermediates, and end products by atomic absorption spectrometry (Flame-AAS) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/a/010.02 | In-house method | Elements by Flame-AAS in raw materials, intermediates, and end products | Inorganic and organic chemicals (additives) | general | 2/11/25 |
| CL/a/002.07 | various standards | Cr, Cu, Fe, Ni, Zn by Flame-AAS in waste, surface, and groundwater | Water | Water | 2/11/25 |
| DIN 38406-06:1998-07 (E6): German standard methods for water, wastewater, and sludge analysis - Cations (Group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6) | |||||
| DIN 38406-07:1991-09 (E7): Determination of copper by atomic absorption spectrometry (AAS) (E7) | |||||
| DIN 38406-08:2004-10 (E8): Determination of zinc - Method by atomic absorption spectrometry (AAS) in air-acetylene flame (E8) not accredited | |||||
| DIN 38406-11:1991-09 (E11): Determination of nickel by atomic absorption spectrometry (AAS) (E11) | |||||
| DIN 38406-13:1992-07 (E13): Determination of potassium by atomic absorption spectrometry (AAS) in air-acetylene flame (E13) accredited | |||||
| DIN 38406-14:1992-07 (E14): Determination of sodium by atomic absorption spectrometry (AAS) in air-acetylene flame (E14) | |||||
| DIN 38406-24:1993-03: German standard methods for water, wastewater, and sludge analysis; Cations (Group E); Determination of cobalt by atomic absorption spectrometry (AAS) (E 24) | |||||
| DIN 38406-32:2000-05: Determination of iron by atomic absorption spectrometry (E32) | |||||
| DIN 38406-33:2000-06: German standard methods for water, wastewater, and sludge analysis - Cations (Group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33) | |||||
| DIN EN 1233:1996-08 (E10): Determination of chromium - Method by absorption spectrometry (E10) | |||||
| DIN EN ISO 12020:2000-05 Water quality - Determination of aluminum - Method by atomic absorption spectrometry (ISO 12020:1997); German version EN ISO 12020:2000 | |||||
| DIN EN ISO 5961:1995-05: Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994); German version EN ISO 5961:1995 | |||||
| DIN EN ISO 7980 (2000-07) (E3a): Determination of calcium and magnesium by absorption spectrometry (E3a) | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Inorganic analytical chemistry and solid-state analysis | |||||
| Test Type: Atomic Spectrometry | |||||
| Test Scope: Determination of elements in raw materials, intermediates, and end products by inductively coupled plasma mass spectrometry (ICP-MS) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/a/012.02 | In-house method | Elements in raw materials, intermediates, and end products by inductively coupled plasma mass spectrometry (ICP-MS) in aqueous digestion solutions and aqueous eluates | Digestion solutions and aqueous eluates | general | 12/9/24 |
| DIN EN ISO 17294-1 (E29) (2024-07): Water quality – Application of inductively coupled plasma mass spectrometry (ICP-MS) – Part 1: General requirements (ISO 17294-1:2024); German version EN ISO 17294-1:2024 | |||||
| DIN EN ISO 17294-2 (E29) (2017-01): Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes | |||||
| DIN EN ISO 17294-2 (E29) (2024-12): Water quality – Application of inductively coupled plasma mass spectrometry (ICP-MS) – Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2023, corrected version 2024-02); German version EN ISO 17294-2:2023 | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Inorganic analytical chemistry and solid-state analysis | |||||
| Test Type: Atomic Spectrometry | |||||
| Test Scope: Test methods for the Water specialist module – Sub-area 3: Elemental analysis [Flex A] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/a/011.02 | DIN EN ISO 17294-2 (E29) (2017-01) | Al, As, B, Cd, Ca, Cu, Cr, Fe, K, Mg, Na, Ni, P, Pb, Zn and other elements using ICP-MS in wastewater, surface water, groundwater, aqueous eluates, and aqueous digestion solutions | Water | Water | 12/9/24 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Chromatography | |||||
| Test Type: Gas Chromatography | |||||
| Test Scope: Determination of organic and other volatile compounds in chemical products using gas chromatography with conventional detectors (FID, WLD) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CH/g/001.08 | In-house method | Identification and quantification of organic compounds and gases in chemical products using gas chromatography (GC) with conventional detectors (FID) | Inorganic and organic chemicals (additives) | general | 12/16/24 |
| CH/g/019.04 | In-house method | Quantification of methanol, 2-propanol, toluene, and diacetone alcohol in acetone using gas chromatography (GC) with a conventional detector (FID) | Polymers (resins; fibers) | Medical Technology | 12/16/24 |
| CH/g/020.08 | VDA277 | Determination of total carbon emission from non-metallic materials | Polymers (resins; fibers) | Automotive | 9/12/22 |
| FLTM BZ 157-01 (2011-03): Determination of organic emissions from non-metallic materials in vehicle interiors by headspace gas chromatography | |||||
| PV 3341 (1995-03): Determination of total carbon emission from non-metallic materials | |||||
| STD 429-003 (2005-01): Determination of organic emissions from non-metallic materials in vehicle interiors | |||||
| VCS 1027,2749 (2004-03): Determination of organic emissions from non-metallic materials in vehicle interiors | |||||
| VDA277 (1995-01): Determination of total carbon emission from non-metallic materials | |||||
| CH/g/024.01 | In-house method | Quantification of epichlorohydrin, methacrylic acid, glycidol, and 4-methoxyphenol in glycidyl methacrylate using gas chromatography (GC) with a conventional detector (FID) | Polymers (resins; fibers) | Medical Technology | 6/2/25 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Chromatography | |||||
| Test Type: Gas Chromatography | |||||
| Test Scope: Determination of organic and other volatile compounds in chemical products using gas chromatography with mass-selective detectors (MS) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CH/g/002.05 | In-house method | Identification and quantification of organic compounds and gases in chemical products using gas chromatography (GC) with a mass-selective detector (MS) | Inorganic and organic chemicals (additives) | general | 4/14/25 |
| CH/g/021.08 | VDA 278 | Thermodesorption analysis of organic emissions for the characterization of non-metallic automotive materials | Polymers (resins; fibers) | general | 4/14/25 |
| GMW 15634 (2014-11): Determination of Volatile and Semi-Volatile Organic Compounds from Vehicle Interior Materials | |||||
| PPV 8042 (2011-05): Emission behavior – Thermodesorption analysis | |||||
| VDA 278 (2011-10): Thermodesorption analysis of organic emissions with GC/MS | |||||
| VDA 278 (2016-05): Thermodesorption analysis of organic emissions for the characterization of non-metallic automotive materials | |||||
| CH/g/023.03 | In-house method | Determination of volatile components in plastics using headspace gas chromatography with conventional and/or mass-specific detector | Polymers (resins; fibers) | general | 6/27/25 |
| DIN EN 13628-1 (2003-01): Packaging; Flexible packaging materials - Determination of residual solvents by static headspace analysis using gas chromatography - Part 1: Absolute methods | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Chromatography | |||||
| Test Type: HPLC and related types of column chromatography | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/c/001.03 | based on BIA workbook "Measurement of Hazardous Substances" test methods 6150, 7780, 8090 | Determination of cations in aqueous solutions using ion chromatography | Water | Water | 7/22/14 |
| CL/c/002.05 | BGIA-Arbeitsmappen, 7512, 6640, 6370, 8562, 8375, 8580; VDI 3497 B3, DIN EN ISO 10304-1 (D20) (2009-07) | Determination of dissolved anions F-, Cl-, NO2-, Br-, NO3-, PO43-, and SO42- using ion chromatography | Water | Water | 7/22/14 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Chromatography | |||||
| Test Type: HPLC and related types of column chromatography | |||||
| Test Scope: Separation and quantification of individual components in mixtures of organic compounds using liquid chromatography (HPLC) with conventional detectors (UV, DAD, RI) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CH/h/001.06 | In-house method | Quantification of individual components in mixtures of organic compounds using liquid chromatography (HPLC) with conventional detectors (UV, DAD, RI) | Inorganic and organic chemicals (additives) | general | 12/16/24 |
| CH/h/019.04 | In-house method | Quantification of hydroquinone (HQ) in methyl methacrylate (MMA) using liquid chromatography (HPLC) with UV/Vis detector | Inorganic and organic chemicals (additives) | Medical technology | 11/1/24 |
| CH/h/020.03 | In-house method | Quantification of N,N-dimethyl-p-toluidine (DmpT) in methyl methacrylate (MMA) using liquid chromatography (HPLC) with UV/Vis detector | Inorganic and organic chemicals (additives) | Medical technology | 11/1/24 |
| CH/h/021.03 | In-house method | Quantification of dye ATTO680 in aqueous buffer solution using liquid chromatography (HPLC) with UV/Vis detector | Inorganic and organic chemicals (additives) | Medical technology | 12/9/24 |
| CH/h/026.01 | GMW 15635 (2012-08) | Determination of aldehyde and ketone emissions from non-metallic materials using DNPH derivatization | Polymers (resins; fibers) | Automotive | 11/14/18 |
| AA-0061 (2014-02) Determination of formaldehyde emission from non-metallic materials and components using HPLC according to BMW AA-0061 | |||||
| BZ 156-01 Part B (2011-07) Determination of aldehyde and ketone emissions from non-metallic materials and components in vehicle interiors using HPLC according to Ford specification BZ 156-01 Part B | |||||
| STD-A0202 (2016-12) Determination of Aldehyde and Ketone Emissions from Vehicle Interior Materials | |||||
| CH/h/027.02 | In-house method | Relative quantification of Concanavalin A in aqueous buffer solution using liquid chromatography (HPLC) with UV/Vis detector | Inorganic and organic chemicals (additives) | Medical technology | 12/9/24 |
| CH/h/028.01 | DIN ISO 16000-3 (2013-01) | Indoor air pollutants - Part 3: Measurement of formaldehyde and other carbonyl compounds in indoor air and in test chambers - Sampling with a pump | Inorganic and organic chemicals (Additives) | general | 2/5/21 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Chromatography | |||||
| Test Type: HPLC and related types of column chromatography | |||||
| Test Scope: Determination of molecular weight distributions of polymers by means of Size Exclusion Chromatography (GPC/SEC) with conventional detector (RI) [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PA/s/001.04 | In-house Method | Determination of molecular weight distributions of polymers by Size Exclusion Chromatography (GPC) | Polymers (Resins; Fibers) | general | 2016-10-04 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Titrimetric Analyses | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/t/024.02 | In-house Method | Total alkalinity of sodium hydroxide solution by potentiometric titration | Inorganic and organic chemicals (Additives) | Chemical Fiber | 2019-11-15 |
| CL/t/045.01 | In-house Method | Hydrochloric acid - Content determination (titrimetric) | Inorganic and organic chemicals (Additives) | general | 2009-02-16 |
| CL/t/051.01 | In-house Method | Complexometric content determination of Copper(I) iodide, CuI | Inorganic and organic chemicals (Additives) | Chemical Fiber | 2010-12-07 |
| CL/t/052.01 | In-house Method | Argentometric content determination of potassium iodide | Inorganic and organic chemicals (Additives) | Chemical Fiber | 2010-12-13 |
| CL/t/057.02 | In-house Method | Titrimetric determination of isocyanate content (Isocyanate number) | Inorganic and organic chemicals (Additives) | general | 2023-12-21 |
| CL/t/058.03 | In-house Method | Release tests on strong caustic deliveries, NaOH 32% and 50% | Inorganic and organic chemicals (Additives) | general | 2016-05-02 |
| CL/t/059.01 | In-house Method | Argentometric content determination of potassium bromide | Inorganic and organic chemicals (Additives) | general | 2013-01-03 |
| CL/t/060.01 | DIN 53240 | Determination of hydroxyl value OHV | Inorganic and organic chemicals (Additives) | general | 2013-01-15 |
| DIN 53240-1 (2013-06): Determination of hydroxyl value – Part 1: Method without catalyst | |||||
| CL/x/001.01 | In-house Method | Formaldehyde solution, approx. 36%: a) Appearance, b) Oxidizable matter, c) Content | Inorganic and organic chemicals (Additives) | general | 2004-12-15 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Titrimetric Analyses | |||||
| Test Scope: Determination of active substance contents and impurities in chemical raw materials, intermediates, and end products by means of titrimetry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/p/002.06 | In-house Method | Carboxyl end groups of polyester and polyamide by colorimetric titration | Polymers (Resins; Fibers) | Chemical Fiber | 2019-11-11 |
| ASTM D 7409 (2015): Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns | |||||
| TC 189 WI 00189199 (Draft): Geosynthetics - Standard test method for the determination of the carboxyl end group - Content of polyethylene terephthalate (PET) | |||||
| CL/t/002.01 | In-house Method | Determination of saponification number or saponification value | Inorganic and organic chemicals (Additives) | Chemical Fiber | 2004-12-15 |
| DIN 51559-1 (2009-04): Determination of saponification number | |||||
| CL/t/003.02 | DIN EN ISO 2114 (2006-11) | Determination of acid number or acid value in raw materials (e.g., technical oils) by titration | Inorganic and organic chemicals (Additives) | general | 2024-01-15 |
| CL/t/004.01 | In-house Method | Potentiometric determination of basic nitrogen (raw materials) | Inorganic and organic chemicals (Additives) | Chemical Fiber | 2005-01-01 |
| CL/t/037.01 | In-house Method | Sulfuric acid - Content determination (titrimetric) | Inorganic and organic chemicals (Additives) | general | 2007-08-24 |
| CL/t/042.02 | In-house Method | Amino end groups of polyamide by potentiometric titration | Polymers (Resins; Fibers) | Chemical Fiber | 2019-11-15 |
| CL/t/062.02 | In-house Method | Organically bound nitrogen in liquids and solids according to Kjeldahl | Polymers (Resins; Fibers) | general | 2019-11-15 |
| DIN EN 25663 (1993-11): Water quality; Determination of Kjeldahl nitrogen; Method after digestion with selenium | |||||
| CL/t/064.03 | In-house Method | Potassium peroxodisulfate content by titrimetry | Inorganic and organic chemicals (Additives) | Medical Technology | 2019-09-09 |
| PA/d/026.04 | In-house Method | Determination of free sulfuric acid in sulfonated polyethersulfone (PES) | Polymers (Resins; Fibers) | Medical Technology | 2015-03-31 |
| CL/k/012.02 | In-house Method | Potentiometric measurement of pH value | Inorganic and organic chemicals (Additives) | general | 2006-03-28 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Titrimetric Analyses | |||||
| Test Scope: Test methods for the Water specialist module – Sub-area 4/5: Group and sum parameters | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/t/007.04 | DIN 38409 H41 (1980-12) | Determination of chemical oxygen demand (COD) according to DIN 38409 - H41 | Water | Water | 2014-09-30 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Not Accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/005.02 | In-house Method | Determination of Melting Point with Mettler FP 61 Instrument | Inorganic and Organic Chemicals (Additives) | General | 2006-03-17 |
| CL/k/006.02 | German Standard Methods | Determination of Biochemical Oxygen Demand | Water | Water | 2006-08-18 |
| CL/k/023.01 | In-house Method | Boiling Range Diphyl (New/Used Material) | Inorganic and Organic Chemicals (Additives) | Synthetic Fiber | 2021-03-30 |
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Determination of Particle Size of Plastics and Inorganic Compounds by Laser Diffraction [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| EM/p/002.02 | In-house Method | Determination of Particle Size Distribution of Powder Samples by Laser Diffraction | Inorganic and Organic Chemicals (Additives) | General | 2025-06-10 |
| ISO 13320 (2009-12): Particle size analysis - Laser diffraction methods | |||||
| EM/p/003.03 | In-house Method | Determination of Particle Size Distribution of PMMA Samples by Laser Diffraction | Polymers (Resins; Fibers) | Medical Technology | 2025-06-10 |
| EM/p/004.03 | In-house Method | Particle Size Measurement of Hydroxyapatite Samples by Laser Diffraction | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2025-06-10 |
| ISO 13320 (2020-01): Particle Size Analysis - Particle Measurement by Laser Diffraction | |||||
| ISO 14703 (2008-04): High-performance ceramics - Sample preparation for the determination of particle size distribution of ceramic powders | |||||
| ISO 24235 (2007-04): Advanced Technical Ceramics - Determination of Particle Size Distribution of Ceramic Powders by Laser Diffraction | |||||
| EM/p/005.02 | In-house Method | Determination of Particle Size Distribution of Zirconium Dioxide Samples by Laser Diffraction | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2025-06-10 |
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Determination of Refractive Index of Chemical Raw Materials, Intermediates, and End Products by Refractometry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/010.04 | In-house Method | Measurement of Refraction (Refractive Index) by Refractometer | Inorganic and Organic Chemicals (Additives) | General | 2020-09-28 |
| DIN 51423-1 (2010-02): Testing of mineral oils - Part 1: Measurement of relative refractive index with a precision refractometer | |||||
| Ph. Eur. 10.0 Chapter 2.2.6: Refractive Index | |||||
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Determination of Density of Solid Chemical Raw Materials, Intermediates, and End Products by Displacement Principle [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/014.01 | In-house Method | Density of Solids by Immersion Method (Displacement Method) | Polymers (Resins; Fibers) | General | 2008-07-21 |
| ISO 1183-1 (2013-04) Density of solids by immersion method (displacement method) non-foamed plastics – Part 1 | |||||
| PC/p/010.01 | In-house Method | Determination of Bulk Density | Polymers (Resins; Fibers) | Automotive | 2012-09-13 |
| DIN EN 323 (1993-08): Wood-based materials - Determination of bulk density | |||||
| DIN EN ISO 845 (1995-06): Cellular rubbers and plastics - Determination of apparent density | |||||
| DIN EN ISO 845 (2009-10): Cellular rubbers and plastics - Determination of apparent density | |||||
| PV 3410 - Sec. 3.3 (2005-04): PUR flexible foam (Apparent density) | |||||
| PV 3410 (2017-11): PUR flexible foam Tensile strength and elongation at break | |||||
| PC/p/030.01 | ISO 1183 | Density of Solids by Immersion Method (Displacement Method) | Polymers (Resins; Fibers) | General | 2017-11-20 |
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings and functional parts in exterior applications | |||||
| DIN EN ISO 1183-1 (2013-04): Methods for determining the density of non-foamed plastics – Part 1: Immersion method, liquid pycnometer method and titration method | |||||
| DIN EN ISO 1183-1 (2019-09): Methods for determining the density of non-foamed plastics – Part 1: Immersion method, liquid pycnometer method and titration method | |||||
| VW 44045-PP6 (2016-12): Polypropylene, finished parts material requirements | |||||
| VW 50123 (2015-09): Thermoplastic elastomers quality requirements | |||||
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Determination of Density of Liquid Chemical Raw Materials, Intermediates, and End Products by Oscillating U-tube Principle [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/011.05 | In-house Method | Density Measurement in Raw Materials, Intermediates, and End Products with the Oscillating U-tube based on the Oscillation Principle | Inorganic and Organic Chemicals (Additives) | General | 2025-06-02 |
| DIN 51757 (2011-01): Testing of mineral oils and related products - Determination of density | |||||
| DIN EN ISO 12185 (1997-11): Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method | |||||
| DIN EN ISO 15212-1 (2009-07): Density meters based on the oscillation principle – Part 1 | |||||
| Test Area: Chemical and Physico-chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Physical Characteristic Values | |||||
| Test Scope: Determination of Surface Tension of Liquid Chemical Raw Materials, Intermediates, and End Products by the Ring Method [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/x/007.02 | In-house Method | Surface Tension by the Ring Method | Inorganic and Organic Chemicals (Additives) | General | 2019-07-02 |
| DIN ISO 1409 (2008-11): Plastics/Rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method (ISO 1409:2006) | |||||
| DIN EN 14370 (2004-11): Surface active agents – Determination of surface tension; German version EN 14370:2004 | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Physical characteristic values | |||||
| Test Scope: Determination of the color number of liquid chemical raw materials, intermediates, and end products by spectrophotometry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/x/003.06 | In-house method | Determination of Pt-Co / APHA / Hazen color number in raw materials, intermediates, and end products by photometer | Inorganic and organic chemicals (additives) | general | 2025-06-25 |
| ASTM D 5386-24 (2024): Standard Test Method for Color of Liquids Using Tristimulus Colorimetry | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Physical characteristic values | |||||
| Test Scope: Test procedures for the Water specialist module – Sub-area 1: Sampling and general parameters | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/001.03 | DIN 38404 (C4) (1976-12) | Determination of temperature according to DIN 38404 (C4) | Water | general | 2009-11-20 |
| CL/k/002.02 | EN 27888 (C8) (1993-11) | Determination of electrical conductivity according to EN 27888 | Water | general | 2006-09-06 |
| CL/k/003.03 | DIN EN ISO 10523-C5 (2012-04) | Determination of pH value according to DIN EN ISO 10523-C5 | Water | general | 2014-01-28 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Physical characteristic values for polymers | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/k/024.01 | In-house method | Limiting viscosity number and average degree of polymerization of cellulose | Polymers (resins; fibers) | Chemical fiber | 2022-02-21 |
| ISO 5351 (2010-02): Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Physical characteristic values for polymers | |||||
| Test Scope: Determination of solution viscosity of polymers by capillary viscometry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PA/d/036.01 | In-house method | Determination of solution viscosity (LV) of sulfonated polyethersulfone (SPES) in sulfuric acid with the Ubbelohde viscometer | Polymers (resins; fibers) | Medical technology | 2018-07-02 |
| PA/d/037.01 | ISO 5833 | Determination of the stability of methyl methacrylate monomer according to ISO 5833 (2002-05), Annex A | Polymers (resins; fibers) | Medical technology | 2019-10-31 |
| ISO 5833 (2002-05): Implants for surgery – Acrylic resin cements (2002-05-01) Annex A: Determination of stability of liquid component | |||||
| CL/k/029.01 | In-house method | Solution viscosity of polymers by Ubbelohde viscometer in inorganic and organic solvents | Polymers (resins; fibers) | Chemical fiber | 2025-04-09 |
| ASTM D 4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer | |||||
| ASTM D 2857-95 (2007) Standard Practice for Dilute Solution Viscosity of Polymers | |||||
| DIN EN ISO 1628-1 (2021-06): Plastics – Determination of the viscosity of polymers in dilute solution using a capillary viscometer – Part 1: General principles | |||||
| DIN EN ISO 1628-1 (2025-06): Plastics – Determination of the viscosity of polymers in dilute solution using a capillary viscometer – Part 1: General principles (ISO 1628-1:2024); German version EN ISO 1628-1:2024 | |||||
| DIN EN ISO 1628-2 (2020-12): Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 2: Vinyl chloride polymers | |||||
| DIN EN ISO 1628-3 (2010-10): Plastics - Determination of the viscosity of polymers in dilute solution using a capillary viscometer - Part 3: Polyethylene and polypropylene | |||||
| DIN EN ISO 1628-5 (2015-05): Plastics - Determination of the viscosity of polymers in dilute solution using a capillary viscometer - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers | |||||
| DIN EN ISO 307 (2013-08): Plastics – Polyamides – Determination of viscosity number | |||||
| DIN EN ISO 307 (2019-11): Plastics – Polyamides – Determination of viscosity number | |||||
| ISO 1628-4 (1999-03): Plastics - Determination of the viscosity of polymers in dilute solution using a capillary viscometer - Part 4: Polycarbonate (PC) moulding materials | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Chemical characteristic values | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/d/016.01 | In-house method | Measurement of moisture content of PA and PES granulate using the AVM-3000 vapor pressure apparatus | Polymers (resins; fibers) | general | 2006-03-02 |
| DIN ISO 15512 (2017-03): Plastics – Determination of water content (ISO 15512:2016); Method 'D' | |||||
| CL/d/021.02 | DIN EN ISO 5814 (G22) (2013-03) | Determination of dissolved oxygen - Electrochemical method | Water | Water | 2023-04-05 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and characteristic value determinations | |||||
| Test Type: Chemical characteristic values | |||||
| Test Scope: Water content of chemical raw materials, intermediates, and end products by titrimetric determination according to Karl Fischer [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/d/007.05 | In-house method | Water content of solids coulometrically according to Karl Fischer | Polymers (resins; fibers) | general | 2021-03-22 |
| DIN EN ISO 15512 (2017-03): Plastics - Determination of water content (ISO 15512:2016) | |||||
| DIN EN ISO 15512 (2019-09): Plastics - Determination of water content (ISO 15512:2019) | |||||
| DIN 51777 (2020-04): Petroleum products - Determination of water content by Karl Fischer titration | |||||
| CL/d/005.06 | In-house method | Water content of liquids volumetrically by Karl Fischer | Polymers (Resins; Fibers) | general | 2/19/21 |
| DIN 51777 (2020-04): Petroleum products - Determination of water content by Karl Fischer titration | |||||
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and parameter determinations | |||||
| Test Type: Gravimetry | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/d/009.01 | In-house method | Commercial weights of polyamide and polyester yarns | Polymers (Resins; Fibers) | Synthetic fiber | 12/15/04 |
| CL/d/011.03 | In-house method | Gravimetric determination of DIP applications after polymer removal | Polymers (Resins; Fibers) | Synthetic fiber | 6/26/06 |
| CL/d/015.02 | In-house method | Electrolytic determination of copper in HR solution | Inorganic and organic chemicals (Additives) | Synthetic fiber | 5/9/14 |
| CL/x/019.01 | In-house method | Determination of the following parameters in the sales product sodium sulfate: zinc, moisture, pH (1% and 10% solution), iron, sieve fractions | Inorganic and organic chemicals (Additives) | Synthetic fiber | 12/6/06 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and parameter determinations | |||||
| Test Type: Gravimetry | |||||
| Test Scope: Determination of extract content of raw materials, intermediate and final products by gravimetry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PA/d/017.02 | In-house method | Gravimetric water determination of sulfonated polyethersulfone (SPES) | Polymers (Resins; Fibers) | Medical technology | 7/22/02 |
| PA/d/019.02 | In-house method | Gravimetric determination of finish on silk, yarn, and fibers after Soxhlet extraction | Polymers (Resins; Fibers) | Synthetic fiber | 3/6/00 |
| PA/d/020.03 | In-house method | Gravimetric determination of finish on silk, yarn, and fibers after extraction in the shaking apparatus | Polymers (Resins; Fibers) | Synthetic fiber | 7/22/02 |
| PA/d/021.03 | In-house method | Gravimetric residual extract determination of SPES | Polymers (Resins; Fibers) | Medical technology | 8/6/02 |
| PA/d/024.01 | In-house method | Gravimetric determination of total oligomer content in PET | Polymers (Resins; Fibers) | Synthetic fiber | 1/20/95 |
| PA/d/034.02 | In-house method | Gravimetric additive determination in polypropylene after extraction in the Büchi hot extractor | Polymers (Resins; Fibers) | Medical technology | 12/19/03 |
| CL/d/008.02 | In-house method | Gravimetric determination of preparation application on yarns and fibers after Soxhlet extraction | Polymers (Resins; Fibers) | Synthetic fiber | 11/11/19 |
| ASTM D 2257-98 (2004): Standard Test Method for Extractable Matter in Textiles | |||||
| DIN 54278-1 (1995-10): Testing of textiles - Deposits and accompanying substances - Part 1: Determination of substances soluble in organic solvents | |||||
| CL/d/012.03 | In-house method | Dry content – Evaporation residue | Inorganic and organic chemicals (Additives) | general | 11/14/19 |
| DIN EN ISO 1269 (2007-02): Plastics - Vinyl chloride homo- and copolymers - Determination of volatile components (including water) | |||||
| CL/d/013.03 | In-house method | Determination of ignition residue, oxide ash, sulfate ash | Inorganic and organic chemicals (Additives) | general | 8/25/14 |
| DIN 51575 (2016-06): Testing of mineral oils – Determination of sulfated ash | |||||
| DIN 51903 (2012-11): Testing of carbonaceous materials – Determination of ash value – Solids | |||||
| EN ISO 1172 (1998-12): Prepregs, moulding compounds and laminates - Determination of textile glass and mineral filler content - Calcination method | |||||
| DIN EN ISO 3451-1 (2008-11): Plastics – Determination of ash – Part 1: General principles | |||||
| DIN EN ISO 3451-1 (2019-05): Plastics – Determination of ash – Part 1: General methods | |||||
| CL/d/028.01 | In-house method | Quantitative determination of residual extract and additive content in polymer | Polymers (Resins; Fibers) | general | 12/14/11 |
| DBL 5555 (2014-04): Finished parts and semi-finished products made of organic polymer materials - General conditions and test methods | |||||
| DIN EN ISO 6427 (2014-08): Plastics – Determination of extractable components by organic solvents | |||||
| FDA § 21 CFR 177.2510 (2021-10): INDIRECT FOOD ADDITIVES: POLYMERS - Polyvinylidene fluoride resins | |||||
| CL/d/031.02 | In-house method | Calcium sulfate hemihydrate - Identity test for calcium and sulfate according to German Pharmacopoeia 2019 | Inorganic and organic chemicals (Additives) | Medical technology | 5/20/20 |
| Test Area: Chemical and physico-chemical analysis | |||||
| Test Group: Wet chemistry and parameter determinations | |||||
| Test Type: Fogging behavior | |||||
| Test Scope: Fogging behavior of polymeric materials by gravimetry and reflectometry [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PC/p/036.01 | In-house method | Determination of condensable components (Fogging Gravim. + Reflectometric) | Polymers (Resins; Fibers) | Automotive | 2/5/24 |
| DIN 75201 (2011-11): Determination of fogging characteristics of automotive interior trim materials | |||||
| DIN 75201 (2023-11): Determination of fogging characteristics of automotive interior trim materials (Modification: Procedure B only) | |||||
| DIN 75201 (2024-06): Determination of fogging characteristics of automotive interior trim materials (Modification: Procedure B only) | |||||
| GM GMW 3235 (2011-01): Fogging Characteristics of Trim Materials | |||||
| ISO 6452 (2007-06): Determination of fogging characteristics of trim materials in the interior of automobiles | |||||
| ISO 6452 (2021-05): Determination of fogging characteristics of trim materials in the interior of automobiles | |||||
| PSA D45 1727 (2009-06) - TRIM MATERIALS FOR INTERIOR AND PASSENGER COMPARTMENT PARTS - FOGGING - CONDENSATION | |||||
| SAE J1756 (2006-08): Determination of the Fogging Characteristics of Interior Automotive Materials | |||||
| Toyota TSM0503G-B (2006-12): TRIM MATERIALS FOR INTERIOR AND PASSENGER COMPARTMENT PARTS FOGGING – CONDENSATION | |||||
| Volvo STD 420-0003 (2014-06): Fogging | |||||
| Volvo VCS 1027,2711 (2001-02): Fogging | |||||
| Volvo VCS 1027,2719 (2004-01): Fogging | |||||
| VW PV3015 (1994-05): Fogging Behavior of Automotive Interior Materials | |||||
| VW PV3015 (2019-03): Fogging Behavior of Automotive Interior Materials | |||||
| VW PV3015 (2024-05): Fogging Behavior of Automotive Interior Materials | |||||
| Test Area: Chemical and Physico-Chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Flammability Tests | |||||
| Test Scope: Flammability Tests of Polymeric Materials using a Combustion Chamber [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PC/p/038.01 | In-house Method | Determination of the Burning Behavior of Automotive Interior Materials | Polymers (Resins; Fibers) | Automotive | 2/5/24 |
| 7-G2000 (2018-05): Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment | |||||
| CMVSS 302 (2007-08): Flammability of Interior Materials | |||||
| D45 1333 (2010): INTERIOR MATERIALS FROM THE CABIN HORIZONTAL FLAMMABILITY | |||||
| DBL 5307 Section 6.1 (2018-05): Low Flammability Interior Trim Parts | |||||
| DBL 5307 Section 6.1 (2019-07): Low Flammability Interior Trim Parts | |||||
| DBL 5307.10 (2022-11): Low Flammability Interior Trim Parts - Requirements and Test Specifications | |||||
| DIN 75200 (1980-09): Determination of the Burning Behavior of Automotive Interior Materials | |||||
| Fiat 7-G2000 (2004-04): DETERMINING THE RESISTANCE TO COMBUSTION OF THE NON-METALLIC MATERIALS FOR PARTS INSIDE VEHICLE PASSENGER COMPARTMENT | |||||
| FMVSS 302 (1991-10): Flammability of Interior Materials | |||||
| GB 8410 (2006): Flammability of automotive interior materials | |||||
| GMW 3232 (2011-08): Test Method for Determining the Flammability of Interior Trim Materials | |||||
| GS 97038 (2013-04): Determination of the Burning Behavior of Automotive Interior Materials | |||||
| GS 97038 (2016-03): Determination of the Burning Behavior of Automotive Interior Materials | |||||
| GS 97038 (2020-02): Determination of the Burning Behavior of Automotive Interior Materials | |||||
| Hyundai/KIA MS300-08 (2014-08): FLAMMABILITY RESISTANCE FOR INTERIOR MATERIALS | |||||
| ISO 3795 (1989-10): Road vehicles, and tractors and machinery for agriculture and forestry – Determination of burning behavior of interior materials | |||||
| M0094: Test Method of Flammability of Interior Materials for Automobiles | |||||
| MD 122 (2014-09): Burning Behavior of Materials in the Vehicle Interior | |||||
| PTL 8501 (2020-05): Interior - Burning Behavior - Requirements and Testing, without VSTD 19.1 | |||||
| PTL 8501 (2020-10): Interior - Burning Behavior - Requirements and Testing, without VSTD 19.1 | |||||
| VCS 5031,19 (2004-08): Flammability of interior materials | |||||
| VCS 5031,19 (2018-05): Flammability of interior materials | |||||
| Volvo STD 104-0001 (2012-12): Flammability (burning behavior) of interior and exterior materials | |||||
| VW 96243 (2020-10): Interior - Burning Behavior - Requirements and Testing, without VSTD 19.1 | |||||
| VW TL 1010 (2008-01): Interior Trim Materials - Burning Behavior, Material Requirements | |||||
| VW TL 1010 (2025-02): Interior Trim Materials - Requirements for Burning Behavior, Material Requirements and Tests | |||||
| Test Area: Chemical and Physico-Chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Odor Tests | |||||
| Test Scope: Odor Testing of Polymeric Materials by Olfactory Evaluation [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PC/p/037.01 | In-house Method | Determination of the Odor Behavior of Materials | Inorganic and Organic Chemicals (Additives) | Automotive | 2/5/24 |
| TPJLR.52.458 (2014-05): Determination and assessment of odour from interior trim materials/components/assemblies | |||||
| VDA270 (2016-11): Determination of the Odor Behavior of Automotive Interior Materials | |||||
| VDA270 (2018-06): Determination of the Odor Behavior of Automotive Interior Materials | |||||
| VDA270 (2022-05): Determination of the Odor Behavior of Automotive Interior Materials | |||||
| Volvo STD 429-0001 (2005-01): Odour of trim materials in vehicles | |||||
| Volvo VCS 1027,2712 (2007-01): Odour of trim materials in vehicles | |||||
| Volvo VCS 1027,2729 (2004-05): Odour of trim materials in vehicles | |||||
| VW PV3900 (2000-08): Vehicle Interior Components - Odor Testing | |||||
| VW PV3900 (2019-04): Vehicle Interior Components - Odor Testing | |||||
| Test Area: Chemical and Physico-Chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Other Wet Chemistry and Characteristic Value Determinations | |||||
| Test Scope: Not Accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/x/016.03 | DIN 5667-06:2016-12 | Sampling from Flowing Waters Replacement for DIN 38402–A15:2010-04 | Water | Water | 10/25/13 |
| Test Area: Chemical and Physico-Chemical Analysis | |||||
| Test Group: Wet Chemistry and Characteristic Value Determinations | |||||
| Test Type: Other Wet Chemistry and Characteristic Value Determinations | |||||
| Test Scope: Test Methods for the Water Specialist Module – Sub-area 1: Sampling and General Characteristic Parameters | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/x/013.05 | DIN 38402-11 2009-02 (A11) | Sampling of Wastewater according to DIN 38402-11, 2009-02 (A11) | Water | Water | 9/18/14 |
| CL/x/015.04 | DIN 38402-A12 1985-06 | Sampling from Standing Waters | Water | Water | 9/22/14 |
| CL/x/017.05 | DIN 38402-13 1985-12 | Sampling of Groundwater | Water | Water | 7/26/22 |
| CL/x/020.01 | DIN EN ISO 38402-30:1998-07 | Implementation of Preservation and Handling of Water Samples | Water | Water | 8/25/14 |
| Test Area: Chemical and Physico-Chemical Analysis | |||||
| Test Group: Inorganic-Analytical Test Types; Test Types for Solid Material Analysis | |||||
| Test Type: Elemental Analysis | |||||
| Test Scope: Elemental Analysis of Chemical Raw Materials, Intermediate and End Products after Combustion (Detection Principle: ISE) | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/d/010.04 | In-house Method | Determination of Fluoride in Solids using an Ion-Selective Electrode after Schöniger Digestion | Polymers (Resins; Fibers) | Synthetic Fiber | 6/2/25 |
| AATCC 189 (2012): Fluorine Content of Carpet Fibers | |||||
| Testing Field: Chemical and physico-chemical analytics | |||||
| Test Group: Inorganic analytical test methods; Test methods for solid-state analysis | |||||
| Test Method: Electron/Light Microscopy | |||||
| Test Scope: Determination of lengths and elements by scanning electron microscopy in chemical raw, intermediate, and finished products, mineral building materials, composites, organic and inorganic coatings, paints, varnishes, adhesives, plastics, metals and metal alloys, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Procedure | Test Object | Application | Date |
|---|---|---|---|---|---|
| EM/e/001.07 | In-house method | General work instruction for scanning electron microscopy and X-ray microanalysis | Inorganic and organic chemicals (additives) | general | 2019-04-03 |
| EM/e/002.03 | In-house method | Characterization of the pore structure of membranes | Polymers (resins; fibers) | Medical technology | 2000-03-15 |
| EM/e/003.03 | In-house method | General work instruction for transmission electron microscopy (TEM) | Polymers (resins; fibers) | general | 2004-07-01 |
| EM/e/005.03 | In-house method | Preparation of specimens for transmission electron microscopy (TEM, STEM/EDX) | Polymers (resins; fibers) | general | 2010-02-18 |
| EM/e/008.03 | In-house method | Replication of surfaces and shapes by impression methods | Polymers (resins; fibers) | general | 2007-07-19 |
| EM/e/009.04 | In-house method | Characterization of Ostim samples with STEM | Inorganic and organic chemicals (additives) | Medical technology | 2009-10-01 |
| Testing Field: Chemical and physico-chemical analytics | |||||
| Test Group: Inorganic analytical test methods; Test methods for solid-state analysis | |||||
| Test Method: Electron/Light Microscopy | |||||
| Test Scope: Determination of lengths and areas by optical microscopy in chemical raw, intermediate, and finished products, mineral building materials, composites, organic and inorganic coatings, paints, varnishes, adhesives, plastics, paper and cardboard, metals and metal alloys, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Procedure | Test Object | Application | Date |
|---|---|---|---|---|---|
| EM/l/001.03 | In-house method | General work instruction for light microscopy | Polymers (resins; fibers) | general | 2019-02-01 |
| EM/l/002.04 | In-house method | Preparation of samples for optical microscopy | Polymers (resins; fibers) | general | 2019-11-14 |
| EM/l/007.02 | In-house method | Determination of the layer thickness of varnishes, metal or oxide layers | Polymers (resins; fibers) | Automotive | 2019-08-29 |
| DBL 7384 – 7.3 (2013-03): Coating of plastic parts in vehicle interiors | |||||
| DBL 7384 – 7.3 (2017-11): Coating of plastic parts in vehicle interiors | |||||
| DBL 7384 – 7.3 (2020-10): Coating of plastic parts in vehicle interiors | |||||
| DIN EN ISO 1463 (2004-08): Metallic and oxide coatings – Thickness measurement – Microscopic method | |||||
| DIN EN ISO 2808 (2007-05): Coating materials – Determination of film thickness | |||||
| DIN EN ISO 2808 (2019-12): Coating materials – Determination of film thickness | |||||
| EM/l/009.02 | DIN EN ISO 4628-4 | Assessment of degree of cracking according to ISO 4628-4 | Semi-finished products, intermediate products | general | 2020-02-24 |
| DBL 5578 (2015-10): Elastomer parts coated with sliding varnish | |||||
| DIN EN ISO 4628-4 (2004-01): Paints and varnishes - Evaluation of degradation of coatings - Assessment of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003) | |||||
| DIN EN ISO 4628-4 (2016-07): Paints and varnishes - Evaluation of degradation of coatings - Assessment of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) | |||||
| Testing Field: Chemical and physico-chemical analytics | |||||
| Test Group: Inorganic analytical test methods; Test methods for solid-state analysis | |||||
| Test Method: X-ray fluorescence | |||||
| Test Scope: Determination of elements, constituents, and organic and inorganic compounds by X-ray fluorescence analysis (XRF) in chemical raw, intermediate, and finished products, mineral building materials, composites, organic and inorganic coatings, paints, varnishes, adhesives, plastics, metals and metal alloys, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Procedure | Test Object | Application | Date |
|---|---|---|---|---|---|
| SP/f/001.08 | In-house method | Quantitative determination of chemical elements in consumer products, chemical raw, intermediate, or finished products by X-ray fluorescence analysis (XRF) | Inorganic and organic chemicals (additives) | general | 2024-10-01 |
| SP/f/002.05 | In-house method | Determination of antimony and titanium dioxide in polyester granulate by X-ray fluorescence analysis (XRF) | Polymers (resins; fibers) | Synthetic fiber | 2024-09-01 |
| SP/f/004.06 | In-house method | Determination of Cu, Br, and I in polyamide granulate by X-ray fluorescence analysis (XRF) | Polymers (resins; fibers) | Synthetic fiber | 2024-09-01 |
| SP/f/006.06 | In-house method | Qualitative and semi-quantitative determination of chemical elements in consumer products, chemical raw, intermediate, or finished products by X-ray fluorescence analysis (XRF) | Inorganic and organic chemicals (additives) | general | 9/1/24 |
| DIN 51418-1 (2008-08): X-ray spectral analysis – X-ray emission and X-ray fluorescence analysis (XRF) – Part 1: General terms and fundamentals | |||||
| DIN 51418-2 (2015-03): X-ray emission and X-ray fluorescence analysis (XRF) – Part 2: Terms and fundamentals for measurement, calibration, and evaluation | |||||
| SP/f/007.07 | In-house method | Determination of the calcium/phosphorus ratio in Ostim suspensions and similar formulations by X-ray fluorescence spectroscopy | Inorganic and organic chemicals (additives) | Medical technology | 2024-03-01 |
| SP/f/010.02 | In-house method | Determination of ignition residue in consumer products, chemical raw, intermediate, or finished products for standardization purposes and plausibility checks of results from semi-quantitative element determinations by X-ray fluorescence analysis (XRF) | Inorganic and organic chemicals (additives) | general | 9/1/24 |
| SP/f/011.01 | In-house method | Determination of Cu, I, and K in coated polyamide granulate by X-ray fluorescence analysis (XRF) | Polymers (resins; fibers) | Synthetic fiber | 2024-09-01 |
| Testing Field: Chemical and physico-chemical analytics | |||||
| Test Group: Inorganic analytical chemistry and solid-state analysis | |||||
| Test Type: X-ray Diffraction | |||||
| Test Scope: Determination of inorganic compounds by X-ray diffraction analysis (XRD) in chemical raw materials, intermediates, and final products, as well as inorganic coatings [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| XR/d/001.04 | In-house Method | General SAA for X-ray Diffraction Methods | Inorganic and Organic Chemicals (Additives) | general | 2020-01-10 |
| XR/d/004.03 | In-house Method | Determination of Structural Parameters in Polymers using WAXS | Polymers (Resins; Fibers) | Synthetic Fiber | 2009-09-28 |
| XR/d/005.04 | In-house Method | General Phase Analysis using WAXS | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2019-06-26 |
| XR/d/010.06 | In-house Method | Phase Analysis and Crystallite Size Determination on Ostim Samples | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2019-06-13 |
| XR/d/011.03 | ISO 13779-3 | Characterization of Hydroxyapatite regarding Crystallinity, Phase Purity, and Ca/P Ratio | Inorganic and Organic Chemicals (Additives) | Medical Technology | 2019-06-13 |
| ISO 13779-3 (2018-12): Surgical implants - Hydroxyapatite - Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity | |||||
| Test Area: Chemical and Physico-chemical Analytics | |||||
| Test Group: Inorganic Analytical Test Types; Test Types for Solid State Analysis | |||||
| Test Type: Electron Spectroscopy | |||||
| Test Scope: Determination of surface compositions, functional groups, and oxidation states by Photoelectron Spectroscopy (PES) of chemical raw materials, intermediates, and final products, organic and inorganic coatings, paints, varnishes, adhesives, plastics, metals and metal alloys, glass, ceramics, textiles, packaging materials, and films [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| EM/x/001.02 | In-house Method | General Work Instruction ESCA | Polymers (Resins; Fibers) | general | 2002-07-15 |
| EM/x/002.04 | In-house Method | Performance of XPS Depth Profiling | Polymers (Resins; Fibers) | general | 2009-04-02 |
| EM/x/003.02 | In-house Method | Performance of Angle-Dependent XPS Measurements | Polymers (Resins; Fibers) | general | 2002-07-15 |
| EM/x/004.02 | In-house Method | Determination of Oxidation States and Functional Groups using ESCA | Polymers (Resins; Fibers) | Synthetic Fiber | 2002-07-15 |
| Test Area: Application-Specific Tests | |||||
| Test Group: Mechanical Properties | |||||
| Test Type: Tensile Tests | |||||
| Test Scope: Not Accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| MT/z/011.01 | In-house Method | Standardized Determination of Measurement Uncertainties using the Tensile Test as an Example | Polymers (Resins; Fibers) | general | 2017-10-23 |
| Test Area: Application-Specific Tests | |||||
| Test Group: Mechanical Properties | |||||
| Test Type: Tensile Tests | |||||
| Test Scope: Static Tensile Tests on Polymers [Flex B] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| MT/z/001.03 | DIN EN ISO 13934-1 and DIN EN ISO 1421 | Determination of Tensile Properties of Textiles by Strip Tensile Test | Textiles | Textile | 2025-04-14 |
| ASTM D5035-11: Breaking Force and Elongation of Textile Fabrics (Strip Method) | |||||
| D41 1029 (2009-03): TEXTILES, COATED TEXTILES AND LEATHER - TENSILE STRENGTH | |||||
| DIN EN 29073-3 (1992-08): Test methods for nonwovens, Part 3: Determination of maximum tensile force and maximum tensile elongation | |||||
| DIN EN ISO 13934-1 (2013-08): Determination of maximum tensile force and maximum tensile elongation | |||||
| DIN EN ISO 1421 (2017-03): Rubber or plastic coated fabrics - Determination of tensile strength and elongation at break | |||||
| PTL 8127 (2016-08): Absorption material made of non-woven fiber for interior applications | |||||
| TL 52608 (2015-11): Material requirements multi-layer fine fiber nonwoven; §7.4 Splitting force | |||||
| MT/z/002.01 | DIN EN ISO 527 | Determination of Tensile Properties of Plastics and Plastic Composites | Polymers (Resins; Fibers) | general | 2012-10-25 |
| DBL 7904 (2015-03): Bonding of Components | |||||
| DIN EN ISO 527-1 (2012-06): Plastics – Determination of Tensile Properties | |||||
| DIN EN ISO 527-1 (2019-12): Plastics – Determination of Tensile Properties | |||||
| DIN EN ISO 527-2 (2012-06): Plastics – Determination of Tensile Properties | |||||
| DIN ISO 37 (2017-11): Elastomers or thermoplastic elastomers - Determination of tensile strength properties | |||||
| DIN 53504 (2017-03): Testing of rubber and elastomers – Determination of tear strength, tensile strength, elongation at break, and stress values in the tensile test | |||||
| DIN EN 1465 (2009-07): Adhesives – Determination of tensile shear strength of lap joints | |||||
| DIN EN 50363-3 (2006-10): Insulating, sheathing and jacketing materials for low voltage cables and wires – Part 3: PVC insulating compounds | |||||
| DIN EN 50363-4-1 (2016-10): Insulating, sheathing and jacketing materials for low voltage cables and wires – Part 4-1: PVC sheathing compounds | |||||
| DIN EN 60811-505 (2012-12): Cables, insulated wires and fiber optic cables – Test methods for non-metallic materials – Part 505: Mechanical tests – Low temperature elongation tests for insulating and sheathing compounds | |||||
| FLTM BU 101-06 (2000-11): STATIC AND DYNAMIC SHEAR TESTS OF PRESSURE SENSITIVE TAPES | |||||
| FLTM BU 112-02 (2000-11): PEEL ADHESION OF PRESSURE SENSITIVE TAPES | |||||
| VW TL 52628 A (2018-03): Acoustically effective linings as sandwich composite in the passenger compartment, requirements for materials and components | |||||
| MT/z/003.01 | DIN EN ISO 1798 | Determination of Tensile Strength and Elongation at Break of Flexible Cellular Polymeric Materials | Polymers (Resins; Fibers) | general | 2012-10-25 |
| DIN EN ISO 1798 (2008-04): Flexible cellular polymeric materials - Determination of tensile strength and elongation at break | |||||
| PV 3410 (2017-11): PUR flexible foam §4.2.6 Tensile strength and elongation at break | |||||
| MT/z/004.02 | DIN EN ISO 178, DIN EN ISO 14125 | Determination of Flexural Properties - Three-point Bending Test | Polymers (Resins; Fibers) | general | 2020-06-24 |
| DIN EN ISO 14125 (2011-05): Fibre-reinforced plastics - Determination of flexural properties | |||||
| DIN EN ISO 14130 (1998-02): Determination of apparent interlaminar shear strength by the short-beam three-point bending method | |||||
| DIN EN ISO 178 (2017-06): Plastics - Determination of flexural properties | |||||
| DIN EN ISO 178 (2019-08): Plastics - Determination of flexural properties | |||||
| MT/z/005.01 | DIN EN ISO 1856 | Determination of compression set of flexible cellular polymeric materials | Polymers (Resins; Fibers) | general | 10/25/12 |
| DIN EN ISO 1856 (2008-01): Determination of compression set | |||||
| DIN EN ISO 1856 (2016-09): Determination of compression set | |||||
| DIN EN ISO 1856 (2018-11): Determination of compression set | |||||
| DIN EN ISO 1856 (2020-11): Flexible cellular polymeric materials – Determination of compression set | |||||
| MT/z/006.01 | DIN EN ISO 3386 | Determination of compression stress value of flexible cellular polymeric materials | Polymers (Resins; Fibers) | general | 10/25/12 |
| DIN EN ISO 3386-1 (2015-10): Determination of compression stress-strain characteristics - Low-density materials | |||||
| DIN EN ISO 3386-2 (2010-09): Determination of compression stress-strain characteristics - High-density materials | |||||
| PV 3410 (2017-11): PUR flexible foam §4.2.4 Indentation hardness/Indentation hardness change | |||||
| PV 3919 (2010-01): Non-woven fiber damping - Determination of indentation hardness | |||||
| VW TL 52628 A (2018-03): Acoustically effective linings as sandwich composite in the passenger compartment, requirements for materials and components | |||||
| MT/z/007.01 | DIN EN ISO 2062, DIN 53834 | Tensile testing of yarns and threads | Textiles | Textile | 10/25/12 |
| BISFA (2002): Testing methods for para-aramid filament yarns | |||||
| BISFA (2004): Testing methods for polyamide and polyester filament yarns | |||||
| DIN 53834-1 (1976-02): Simple tensile test on yarns and threads in conditioned state | |||||
| DIN EN ISO 12402-7 (2021-04): Personal flotation devices – Part 7: Materials and components - Safety requirements and test methods | |||||
| DIN EN ISO 2062 (2010-04): Determination of maximum tensile force and maximum tensile elongation of yarn sections | |||||
| MT/z/008.02 | DIN EN ISO 13937, DIN EN 1875-3 and others | Tensile testing of textile fabrics - Tear tests | Textiles | Textile | 4/1/21 |
| DIN EN 1875-3 (1998-02): Rubber or plastics coated fabrics - Determination of tear resistance | |||||
| DIN EN 1875-3 (2023-04): Rubber or plastics coated fabrics - Determination of tear resistance - Part 3: Trapezoidal test piece method | |||||
| DIN EN ISO 13937 (2000-06): Tear properties of textile fabrics | |||||
| DIN EN ISO 3377-1 (2012-03): Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single-edge tear | |||||
| DIN ISO 34-1 (2004-07): Rubber, vulcanized or thermoplastic - Determination of tear strength | |||||
| DIN ISO 34-1 (2016-09): Rubber, vulcanized or thermoplastic - Determination of tear strength | |||||
| PV 3410 (2024-02): PUR flexible foam - Test methods | |||||
| TL 52608 (2015-11): Material requirements for multi-layer fine fiber fleece; §7.5 Tear strength | |||||
| MT/z/009.02 | DIN EN 1464, DIN 53357 and others | Determination of "peel force" of laminations of various material combinations | Semi-finished products, intermediate products | general | 10/23/17 |
| AA-0328 (2018-02): Peel adhesion of adhesive tapes and protective coverings (liners) | |||||
| ASTM D 3330 (2003): Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape | |||||
| BMW PR – 308.2 (2006-04): Climatic testing of adhesive bonds and material connections on trim parts | |||||
| DIN 53357 (1982-10): Testing of plastic sheets and films; Separation test of layers | |||||
| DIN EN 1464 (2010-06): Adhesives - Determination of peel resistance of adhesive bonds - Roller peel test | |||||
| DIN EN 1939 (2003-12): Self-adhesive tapes - Determination of adhesion | |||||
| DIN EN 28510-1 (2014-07): Adhesives - Peel test for flexible-to-rigid bonded assemblies | |||||
| DIN EN ISO 11339 (2010-06): Adhesives - T-peel test for flexible-to-flexible bonded assemblies | |||||
| DIN EN ISO 2411 (2018-02): Coated fabrics - Determination of coating adhesion | |||||
| DIN EN ISO 29862 (2019-09): Self-adhesive tapes – Determination of adhesion | |||||
| FLTM BU 112-02 (2000-11): PEEL ADHESION OF PRESSURE SENSITIVE TAPES | |||||
| Ford WSS-M15P45-B (2009-06): Instrument panel requirements | |||||
| Porsche PLT 8110 (2009-10): Insulation material requirements and tests | |||||
| PSA D51 1485 (2000-10): GLUES AND ADHESIVES PEELING AT RIGHT ANGLES | |||||
| PV 2034 (2009-09): Non-metallic sheet materials – Roller peel test | |||||
| PV 2034 (2020-09): Non-metallic sheet materials – Roller peel test | |||||
| TL 52018 (2015-10): Material requirements for foam adhesive tape, 5.4 relative peel resistance | |||||
| TL 52038 (2019-07): Material requirements for adhesive labels, 5.1 adhesive behavior | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| VW TL 52038 (2019-12): Adhesive labels material requirements | |||||
| VW TL 52628-A (2018-03): Acoustically effective linings as sandwich composite in the passenger compartment, requirements for materials and components | |||||
| MT/z/010.01 | TL 52622 | Determination of "adhesion force" of connections of rubber-like materials with hard components | Semi-finished products, intermediate products | general | 10/23/17 |
| DIN EN 28510-1 (2014-07): Adhesives - Peel test for flexible-to-rigid bonded assemblies | |||||
| TL 52622 (2014-12): Thermoplastic elastomers for exterior applications | |||||
| TL 52622 (2021-02): Thermoplastic elastomers for exterior applications | |||||
| Test Area: Application-oriented tests | |||||
| Test Group: Mechanical Properties | |||||
| Test Type: Static Properties | |||||
| Test Scope: Static hardness testing on semi-finished products, intermediate products, and polymeric materials [Flex B] | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| TP/f/002.04 | DIN ISO 7619-1 + DIN EN ISO 868 + DIN ISO 48-4 | Hardness testing according to Shore A and Shore D | Polymers (Resins; Fibers) | general | 1/28/21 |
| DIN EN ISO 868 (2003-10): Determination of indentation hardness by means of a durometer (Shore hardness) | |||||
| DIN ISO 48-4 (2021-02): Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) | |||||
| DIN ISO 7619-1 (2012-02): Rubber, vulcanized or thermoplastic - Determination of indentation hardness | |||||
| TP/f/006.01 | DIN EN ISO 6508-1 | Rockwell C hardness testing | Metals | general | 12/15/05 |
| DIN EN ISO 6508-1 (2016-12): Metallic materials - Rockwell hardness test | |||||
| TP/f/007.04 | DIN EN ISO 2039-1 | Determination of ball indentation hardness HB | Polymers (Resins; Fibers) | general | 7/18/11 |
| DIN EN ISO 2039-1 (2003-06): Determination of hardness - Part 1: Ball indentation test | |||||
| EN ISO 2039-2 (1999-06): Determination of hardness - Part 2: Rockwell hardness | |||||
| Test Area: Application-oriented tests | |||||
| Test Group: Mechanical Properties | |||||
| Test Type: Mechanical Properties of Polymers | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| PC/x/010.01 | In-house method | Basic parameters for functional verification of mechanical and/or thermal testing equipment | Polymers (Resins; Fibers) | general | 9/1/08 |
| Test Area: Application-Oriented Tests | |||||
| Test Group: Mechanical Properties | |||||
| Test Type: Mechanical Properties of Polymers | |||||
| Test Scope: Testing of Mechanical Properties of Polymers [Flex B] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PC/x/006.03 | DIN EN ISO 179-1 | Determination of Charpy impact properties – Part 1: Non-instrumented impact strength test | Polymers (Resins; Fibers) | general | 4/1/22 |
| DIN EN ISO 179-1 (2010-11): Determination of Charpy impact properties – Part 1: Non-instrumented impact strength test | |||||
| DIN EN ISO 179-1 (2023-10): Determination of Charpy impact properties – Part 1: Non-instrumented impact strength test | |||||
| PC/x/007.01 | DIN EN ISO 180 (2013-08) | Determination of Izod impact strength | Polymers (Resins; Fibers) | general | 9/1/08 |
| DIN EN ISO 180 (2023-09): Plastics – Determination of Izod impact strength (ISO 180:2023); German version EN ISO 180:2023 | |||||
| PC/x/008.02 | DIN EN ISO 75-1 (2020-06) + DIN EN ISO 75-2 (2013-08) | Determination of the heat deflection temperature of thermoplastics | Polymers (Resins; Fibers) | general | 4/14/25 |
| PC/x/009.02 | DIN EN ISO 306 | Determination of the Vicat softening temperature of thermoplastics | Polymers (Resins; Fibers) | general | 4/14/25 |
| DIN EN ISO 306 (2014-03): Vicat softening temperature | |||||
| TL 591 (2015-02): Organic glasses for luminaires – Material requirements | |||||
| DIN EN ISO 306 (2023-03): Determination of the Vicat softening temperature (VST) | |||||
| PC/x/011.04 | various standards | Sample conditioning using physical / chemical parameters | Polymers (Resins; Fibers) | general | 10/23/12 |
| 50184 - Section D (1997-04): Regulations for non-metallic materials - Climate test | |||||
| 50184 - Section B (1997-04): Regulations for non-metallic materials - Climate test | |||||
| AA-0026 (2018-03): Aging resistance test | |||||
| AA-0203 (2011-07): Hydrolysis test | |||||
| AA-0213 (2018-02): Condensation water constant climate test | |||||
| AA-0635 (2015-02): Evaluation scheme after various surface tests of automotive interior materials | |||||
| AA-P 276 (2006-05): Thermal cycling test | |||||
| AK LV 111 (2002-07): Leather covering of steering wheels – Material requirements | |||||
| AK-LV 112 (2002-01): Decorative steering wheel coverings – Material requirements | |||||
| Bentley Motors CQS 119 (2012-06): THERMAL ZONING OF CARS UNDER HIGH HEAT AND/OR SUNSHINE TEST CONDITIONS | |||||
| Bentley Motors CQS 119 (2020-07): THERMAL ZONING OF CARS UNDER HIGH HEAT AND/OR SUNSHINE TEST CONDITIONS | |||||
| BMW AA-0419 (2018-08): Soiling behavior and cleanability of leather | |||||
| BMW PR – 308.2 (2006-04): Climatic testing of adhesive bonds and material connections on trim parts | |||||
| D45 1234 PSA (2008-01): PARTS CONTAINING PLASTIC ELEMENTS - REACTION TO HEAT IN A NON-RADIANT DRY OVEN | |||||
| D45 1333 PSA (2013-03): INTERIOR MATERIALS FROM THE CABIN - HORIZONTAL FLAMMABILITY | |||||
| D47 1309 (2007-02): AUTOMOTIVE EQUIPMENT MATERIALS AND PARTS - AGEING FOLLOWING A GIVEN CLIMATIC CYCLE | |||||
| D47 1309 (2013-07): AUTOMOTIVE EQUIPMENT MATERIALS AND PARTS - AGEING FOLLOWING A GIVEN CLIMATIC CYCLE | |||||
| D47 1309 (1981-11): AUTOMOTIVE EQUIPMENT MATERIALS AND PARTS - AGEING FOLLOWING A GIVEN CLIMATIC CYCLE | |||||
| DBL 1302 (2022-12): Coating of plastic parts in the vehicle interior | |||||
| DBL 5310 (2022-06): Leather for interior trim | |||||
| DBL 5404 section 7.18 (2016-05): Parts made of thermoplastic materials for the direct and indirect area of the passenger compartment, for passenger compartment heating, passenger compartment ventilation, trim panels and housings | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for trim panels, housings and functional parts in exterior applications | |||||
| DBL 5422.50 (2019-10): Window seals | |||||
| DBL 5425 (2020-07): Coating/Painting of plastic parts in the vehicle exterior | |||||
| DBL 5428 (2019-11): Scratch-resistant coatings for plastic parts in the vehicle exterior and coatings on plastic parts for headlights | |||||
| DBL 5463 (2018-07): Lightweight multi-layer sound insulation for interior and exterior applications | |||||
| DBL 5471 (2007-05): Tests according to Daimler specifications | |||||
| DBL 5555 (2014-04): Finished parts and semi-finished products made of organic polymer materials – General conditions and test methods | |||||
| DBL 5972 (2014-01): Single-layer acoustic insulation materials | |||||
| DBL 7382 No. 8.20 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 Section 8.1 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.1.6 (2013-03): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.17 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.19 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.7 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 8465 (2019-05): Electroplated plastic parts with metallic coatings and additional coatings | |||||
| DBL 8465.20 (2016-06): Electroplated plastic parts with metallic coatings and additional coatings | |||||
| DBL 8465.22 (2016-06): Electroplated plastic parts with metallic coatings and additional coatings | |||||
| DBL 9202 (2019-10): Decorative and functional material composite systems in the interior | |||||
| DBL 9202.61 (2013-01): Supply specification for decorative parts in the passenger compartment | |||||
| DBL 9202.70 (2013-01): Supply specification for decorative parts in the passenger compartment | |||||
| DIN 53100 (2007-06): Metallic coatings – Electroplated nickel-chromium and copper-nickel-chromium coatings on plastics | |||||
| DIN 53377 (2021-11): Testing of plastic films - Determination of dimensional change | |||||
| DIN 53496 (1984-05): Electroplated coatings - Testing of electroplated plastic parts - Thermal cycling test | |||||
| DIN 53497 (2017-04): Testing of plastics – Heat aging test on molded parts made of thermoplastic molding compounds, without external mechanical stress | |||||
| DIN 53508 (2000-03): Testing of rubber and elastomers - Artificial aging | |||||
| DIN EN 438-2 (2005-04): Decorative high-pressure laminates (HPL), Part 2: Determination of properties | |||||
| DIN EN 60068-2-1 (2008-01): Environmental influences - Part 2-1: Test methods - Test A: Cold | |||||
| DIN EN 60068-2-14 (2010-04): Environmental influences - Part 2-14: Test methods - Test N: Thermal cycling | |||||
| DIN EN 60068-2-2 (2008-05): Environmental influences - Part 2-2: Test methods - Test B: Dry heat | |||||
| DIN EN 60068-2-30 (2006-06): Environmental influences – Part 2-30: Test methods – Test Db: Damp heat, cyclic | |||||
| DIN EN 60068-2-38 (2010-06): Environmental influences - Part 2-38: Test methods - Test Z/AD: Combined test, temperature/humidity, cyclic | |||||
| DIN EN 60068-2-74 (2019-06): Environmental influences - Part 2-74: Test methods - Test Xc: Contamination by liquids | |||||
| DIN EN 60068-2-78 (2014-02): Environmental influences - Part 2-78: Test methods - Test Cab: Damp heat, steady state | |||||
| DIN EN ISO 1110 (2019-09): Plastics - Polyamides - Accelerated conditioning of test specimens | |||||
| DIN EN ISO 2440 (2015-02): Flexible and rigid foams – Accelerated aging test | |||||
| DIN EN ISO 62 (2008-05): Plastics – Determination of water absorption | |||||
| DIN EN ISO 6270-2 (2018-04): Determination of resistance to humidity – Part 2: Condensation (Exposure in a climatic chamber with heated water reservoir) | |||||
| DIN EN ISO 6270-2 (2005-09): Determination of resistance to humidity – Part 2: Condensation (Exposure in a climatic chamber with heated water reservoir) | |||||
| Fiat 9.55253 (2006-08): MISCELLANEOUS PLASTIC COMPONENTS | |||||
| FLTM BN 102-01 (2001-09): System Design Specification (SDS) FORD/ KNEE AIRBAG | |||||
| FLTM BO 040-01 (2018-07): SHORT AND LONG TERM ENVIRONMENTAL TESTING | |||||
| FLTM BU 101-06 (2000-11): STATIC AND DYNAMIC SHEAR TESTS OF PRESSURE SENSITIVE TAPES | |||||
| GM 9200P (1988-07): ACCELERATED AGING AND STEAMING | |||||
| GMW 14124 (2012-07): Automotive Environmental Cycles | |||||
| GS 94007 (2018-08): Coatings on Plastic Parts, Painted Plastic Parts: Requirements and Tests | |||||
| GS 95024-3-1 (2023-02): Electrical and Electronic Components in Motor Vehicles – Environmental Requirements and Tests | |||||
| GS 95024-3-1 (2019-08): Electrical and Electronic Components in Motor Vehicles – Environmental Requirements and Tests | |||||
| GS 97058 (2015-07): Self-Adhesive Labels | |||||
| HES D 6003 (Rev 6): FLAMMABILITY TEST METHODS FOR AUTOMOBILE INTERIOR MATERIALS | |||||
| KEUR 00821-024 (2012-02): TEST METHOD: FUNGOID GROWTH ON INTERIOR PANELS | |||||
| MBN 51000-4 (2022-08): Polymer-Based Materials, Material Systems, and Semi-Finished Products – Part 4: Thermal Tests | |||||
| MBN 55555-4 (2019-10): Non-Metallic Materials, Material Systems, and Semi-Finished Products – Part 4: Thermal Tests | |||||
| MBN LV 124-2 (2013-08): Electrical and Electronic Components in Passenger Cars up to 3.5t – General Requirements, Test Conditions and Tests Part 2: Environmental Requirements | |||||
| NES M0132: Methods of Thermal Cycle Testing for Plastic Parts | |||||
| NES M0153: Testing Methods of Moisture Resistance for Plastic Parts | |||||
| NES M0160: Method of Testing the Smell of Interior Parts | |||||
| PAPP PWT 7329 (2010-11): Color Change on Automotive Interior Material in a Defined Amine Atmosphere | |||||
| PPV 4015 (2006-04): Exterior Testing of Add-on Parts – Climatic Cycle Test | |||||
| PR 231 (2019-12): Sealing Systems for Doors and Flaps | |||||
| PR 303.4 (1998-12): Climatic Cycle Test for Trim Parts | |||||
| PR 303.5 (2010-01): Climatic Cycle Test for Trim Parts | |||||
| PR 303.6 (2020-06): Climatic Cycle Test for Trim Parts | |||||
| PR 357 (1996-06): Testing of Dimensional Stability of Trim and Upholstery Materials in Climatic Cycle Test | |||||
| PSA B14 1841 (2007-08): RECOMMENDED AND REGULATED ELEMENTS ADHESIVED ON THE BODY INTERIOR | |||||
| PSA B23 2201 (2013-09): PARTS MADE OUT OF ORGANIC MATERIALS - SPECIFIC REQUIREMENTS | |||||
| PSA D47 1234 (2010-11): PARTS INCLUDING PLASTIC COMPONENTS HEAT BEHAVIOR IN NON RADIATING DRY OVEN | |||||
| PTL 5525 (2010-01): Body Exterior Parts Made of Hard Plastics (Thermoplastics and Thermosets) | |||||
| PTL 5536 (2018-10): Vehicle Interior Surface Decors – Paints / Printing / Films / Thin-Film Systems | |||||
| PTL 5538 und VW 96184 (2018-10): Interior – Surface Decors – Wood/ Carbon/ Metals | |||||
| PTL 8127 (2016-08): Absorption Material Made of Non-Woven Fabric for the Interior Area | |||||
| PTL 8140 (2020-02): Interior – General Requirements for Components and Semi-Finished Materials | |||||
| PV 1200 (2004-10): Vehicle Parts – Testing of Climatic Cycle Resistance (+80/-40)°C | |||||
| PV 1200 (2019-10): Vehicle Parts – Testing of Climatic Cycle Resistance (+80/-40)°C | |||||
| PV 1200 (2022-11): Vehicle Parts – Testing of Climatic Cycle Resistance (+80/-40)°C | |||||
| PV 2005 (2000-09): Vehicle Parts – Testing of Climatic Cycle Resistance | |||||
| PV 2005-A (2021-06): Testing of Climatic Cycle Resistance of Special Components, New Developments, and Concepts | |||||
| PV 3410 (2017-11): PUR Flexible Foam – Tensile Strength and Elongation at Break | |||||
| PV 3520 (2010-02): Microswitches – Leak Test | |||||
| PV 3904 (2000-02): Interior Trim Materials – Flame Retardancy | |||||
| PV 3904 (2017-11): Interior Trim Materials – Aging for Flame Retardancy Testing | |||||
| PV 3932 (2006-05): Flocked Plastic Parts – Abrasion Resistance | |||||
| PV 3959 (2019-04): Hydrolysis Test on Molded Headliner with Laminated Decor in the Interior | |||||
| STJLR.51.5262 (2018-02): Performance Requirements of Non-Decorated Plastics | |||||
| TL 226 (2018-04): Coatings on Vehicle Interior Trim Materials – Requirements | |||||
| TL 226 (2016-10): Coatings on Vehicle Interior Trim Materials – Requirements | |||||
| TL 226 (2020-10): Coatings on Vehicle Interior Trim Materials | |||||
| TL 52018 (2015-10): Material Requirements for Foam Adhesive Tape | |||||
| TL 52018 (2015-10): Material Requirements for Foam Adhesive Tape, 5.4 Relative Peel Resistance | |||||
| TL 52038 (2019-07): Material Requirements for Adhesive Labels | |||||
| TL 52038 (2019-12): Adhesive Labels – Material Requirements | |||||
| TL 52038 (2021-11): Adhesive Labels – Material Requirements | |||||
| TL 52085 (2017-06): Valve Seal, Radiator Cap – Material Requirements | |||||
| TL 52231 (2016-12): Polymer Blends of ABS and PC – Material Requirements | |||||
| TL 52231 (2022-06): Polymer Blends of ABS and PC – Material Requirements | |||||
| TL 52288 (2015-02): Polyamide, Mineral-Reinforced, Finished Parts – Material Requirements | |||||
| TL 52388 (2019-04): Polypropylene for Vehicle Interior – Material Requirements | |||||
| TL 52388 (2015-10): Polypropylene for Vehicle Interior – Material Requirements | |||||
| TL 52447 (2006-06): Flocking of Interior Trim Material | |||||
| TL 52447 (2019-04): Flocking of Interior Trim Material | |||||
| TL 52452 (2021-07): Polypropylene with Increased Crystallinity | |||||
| TL 52476 (2014-04): POM Material Requirements | |||||
| TL 52476 (2021-06): POM, Finished Parts for the Vehicle Interior | |||||
| TL 52622 (2021-02): Thermoplastic Elastomers in Hard/Soft Composite for the Exterior Area | |||||
| TL 52625 (2014-09): Plastic Mounting Bracket (Frontend) – Test Scope for Material Data Sheets | |||||
| TL 52639-C, 4.7 (2011-11): Polypropylene, Reinforced, Impact-Resistant, for Instrument Panel – Material Requirements | |||||
| TL 52652 (2013-07): Polymer Blends of ASA and PC | |||||
| TL 52660 (2019-09): Underbody Applications – Engine Encapsulation, Stone Chip Protection, CW Fairings in Thermoplastic Design | |||||
| TL 52685 (2020-10): Polyether PUR Lightweight Foam for Engine Compartment Absorbers | |||||
| TL 527 (2013-03): ABS Graft Polymer, Finished Parts – Material Requirements | |||||
| TL 527 (2020-05): ABS Graft Polymer, Finished Parts | |||||
| TL 52705 (2019-07): Polypropylene with Soft-Touch Feel for Vehicle Interior – Material Requirements | |||||
| TL 528 (2015-01): Chrome-Plated Plastic Parts – Material Requirements | |||||
| TL 591 (2015-02): Organic Glasses for Luminaires – Material Requirements | |||||
| TP-0000706 Version 03 (2015): Climatic Aging of Materials, Components and Assemblies | |||||
| TPJLR.52.351 (2017-11): Resistance to Humidity – General | |||||
| TPJLR.52.352 (2011-02): Resistance to Heat Ageing – General | |||||
| TPJLR.52.353 (2011-02): Accelerated Environmental Ageing | |||||
| VCS 1027,1449 (2011-03): Accelerated corrosion test, version II – ACT II | |||||
| VW 2.8.1 (2016-11): Elastomers – Material Requirements and Tests | |||||
| VW 44045 (2021-09): Polypropylene, Finished Parts | |||||
| VW 44045 (2016-12): Polypropylene, Finished Parts – Material Requirements | |||||
| VW 50123 (2015-09): Thermoplastic Elastomers – Quality Requirements | |||||
| VW 50123 (2022-04): Thermoplastic Elastomers | |||||
| VW 50125 (2017-12): Polyamide 6 for Finished Parts of the Vehicle Interior – Material Requirements | |||||
| VW 50127 (2013-04): Polyamide 66, Finished Parts of the Vehicle Interior – Material Requirements | |||||
| VW 50127 (2021-07): Polyamide 66, Finished Parts of the Vehicle Interior | |||||
| VW 50131 (2020-11): Self-Adhesive Damping Materials – Adhesion Properties | |||||
| VW 50133 (2015-08): PA66 for Finished Parts Outside the Vehicle Interior – Material Requirements | |||||
| VW 50134 (2015-09): PA6 for Finished Parts Outside the Vehicle Interior – Material Requirements | |||||
| VW 50136 (2015-06): PBT for Finished Parts Outside the Vehicle Interior – Material Requirements | |||||
| VW 54045 (2020-09): PP for Finished Parts in the Chassis and Powertrain Area | |||||
| VW TL 1010 (2008-01): Interior Trim Materials – Burning Behavior, Material Requirements | |||||
| VW TL 52388 (2020-03): Polypropylene for Vehicle Interior | |||||
| VW TL 52628-A (2018-03): Acoustically Effective Linings as Sandwich Composite in the Passenger Compartment, Requirements for Materials and Components | |||||
| WSS M15P4-G (05/2016): ASSEMBLY PERFORMANCE, HARD MOLD-IN-COLOR INTERIOR COMPONENTS | |||||
| WSS-M15P4-I (2021-04): PART PERFORMANCE, HARD MOLD-IN-COLOR, INTERIOR COMPONENTS | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| WSS-M99P41-A10/A72 (2014-01): ENGINEERING MATERIAL SPECIFICATION - LABEL PERFORMANCE, NO ADHESIVE/INSTRUCTIONAL TAPES, PSA | |||||
| PC/x/012.01 | Various Standards | Ball Drop Test | Polymers (Resins; Fibers) | Automotive | 2008-01-09 |
| BO 151-01 (2001-04): RESISTANCE TO LOW TEMPERATURE IMPACT | |||||
| Fiat 9.55253 – 2.14 (2006-08): MISCELLANEOUS PLASTIC COMPONENTS | |||||
| Ford WSS-M15P4-H (2018-03): ASSEMBLY PERFORMANCE, HARD MOLD-IN-COLOR INTERIOR COMPONENTS | |||||
| PTL 8140 (2018-03): Interior – General Requirements for Components and Semi-Finished Materials | |||||
| PV 3905 (2015-04): Organic Materials – Ball Drop Test | |||||
| PV 3966 (2006-01): PP Components – Stress Whitening Behavior (Ball Drop Test) | |||||
| PV 3966 (2016-12): PP Components – Stress Whitening Behavior | |||||
| PV 3966 (2021-09): PP Components – Stress Whitening Behavior (Ball Drop Test) | |||||
| PV 3971 (2009-08): Anti-Drumming Layers - Determination of the Adhesion at Low Temperatures | |||||
| PV 3989 (2017-02): Plastics for Exterior Components – Falling Ball Test | |||||
| PV 3989 (2020-11): Plastics for Exterior Components – Falling Ball Test | |||||
| PV 3989 (2023-02): Cold Temperature Behavior of Plastic Components - Falling Ball Test | |||||
| TL 52639-C, 4.6 (2011-11): Polypropylene, Reinforced, Impact-Resistant, for Instrument Panel – Material Requirements | |||||
| VDA 237-101 - Appendix 3 (1996-01): Test Method for Films and Artificial Leather (Falling Ball Test) | |||||
| VW 96238 (2018-03): Interior - General Requirements for Components and Semi-Finished Materials | |||||
| WSS-M15P4-I (2021-04): PART PERFORMANCE, HARD MOLD-IN-COLOR INTERIOR COMPONENTS | |||||
| PC/x/013.02 | DIN EN ISO 22088-3 | Stress Crack Resistance | Polymers (Resins; Fibers) | Automotive | 7/18/11 |
| DIN EN ISO 22088-3 (2006-11): Plastics – Determination of Resistance to Environmental Stress Cracking (ESC) – Part 3: Bent Strip Method | |||||
| PC/x/016.01 | Various Standards | Surface Resistance to Sharp-Edged and Hard Objects | Polymers (Resins; Fibers) | Automotive | 12/6/18 |
| BN 108-13 (2001-09): RESISTANCE TO SCRATCHING | |||||
| BO 162-01 (2009-01): RESISTANCE TO SCRATCH AND MARR | |||||
| DBL 9202 AA.30, 9.18 (2013-01): Delivery Specification for Decorative Parts in the Passenger Compartment | |||||
| DIN EN ISO 1518-1 (2023-05): Coating Materials – Determination of Scratch Resistance – Part 1: Constant-Load Method | |||||
| GMW 14688 (2012-09): Scratch and Mar Resistance | |||||
| GS 97034-8 (2015-09): Surface Testing of Automotive Interior Materials - Determination of Marring Tendency | |||||
| GS 97034-8 (2021-04): Surface Testing of Automotive Interior Materials - Determination of Marring Tendency | |||||
| GS 97034-9 (2015-09): Surface Testing of Automotive Interior Materials - Scratch Test | |||||
| GS 97034-9 (2021-04): Surface Testing of Automotive Interior Materials - Scratch Test | |||||
| PV 3952 (2015-11): Plastic Interior Components - Testing of Scratch Resistance | |||||
| PV 3952 (2019-03): Plastic Interior Components - Testing of Scratch Resistance | |||||
| PV 3952 (2021-03): Plastic Components - Determination of Mar Resistance of Injection-Molded Glossy Surfaces in Vehicle Interior and Exterior | |||||
| PV 3974 (2010-11): Plastic Interior Components - Determination of Mar Resistance of Injection-Molded Grained Surfaces in Vehicle Interior | |||||
| PV 3974 (2022-05): Plastic Components - Determination of Mar Resistance of Injection-Molded Glossy Surfaces in Vehicle Interior and Exterior | |||||
| STJLR.51.5262 (2016-01): Performance Requirements Of Non-Decorated Plastics | |||||
| STJLR.51.5262 (2018-02): Performance Requirements of Non-Decorated Plastics | |||||
| TL 52388 (2019-04): Polypropylene for Vehicle Interior Material Requirements | |||||
| TL 52388 (2020-03): Polypropylene for Vehicle Interior Material Requirements | |||||
| TPJLR.52.002 (2011-02): Mar Resistance | |||||
| TPJLR.52.008 (2017-01): Assessment of Scratch Performance - Crosshatch Method | |||||
| Test Area: Application Technology Testing | |||||
| Test Group: Thermal Properties | |||||
| Test Type: Thermal Analysis | |||||
| Test Scope: Not Accredited | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| XR/b/001.05 | In-house Method | General SAA for Thermal Analyses | Polymers (Resins; Fibers) | General | 9/10/18 |
| XR/b/013.06 | DIN EN ISO 11358-1 | Plastics - Thermogravimetry of Polymers | Polymers (Resins; Fibers) | General | 11/14/19 |
| DIN EN ISO 11358-1 (2014-10): Plastics – TG of Polymers | |||||
| VW PV 3927 (2017-11): Thermogravimetry for Plastics and Elastomers | |||||
| XR/b/022.01 | DIN EN ISO 11357-3 | Determination of Temperature and Enthalpy of Melting and Crystallization of (Partially) Crystalline Plastics by DSC at Reduced Temperatures | Polymers (Resins; Fibers) | General | 1/22/20 |
| XR/b/024.01 | DIN EN ISO 11357-3 | Determination of the Melting Point of Irgacure-Omnirad 2959 and H-Tempo by DSC | Inorganic and Organic Chemicals (Additives) | General | 11/1/24 |
| Test Area: Application Technology Testing | |||||
| Test Group: Thermal Properties | |||||
| Test Type: Thermal Analysis | |||||
| Test Scope: Thermoanalytical Investigations on Polymeric Materials for the Determination of Thermal Properties [Flex B] | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| XR/b/020.03 | DIN EN ISO 11357-3 (2018-07) | Determination of Temperature and Enthalpy of Melting and Crystallization of (Partially) Crystalline Plastics by DSC from Room Temperature | Polymers (Resins; Fibers) | General | 1/22/20 |
| Test Area: Application Technology Testing | |||||
| Test Group: Rheological Properties | |||||
| Test Type: Rheology | |||||
| Test Scope: Not Accredited | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| CL/r/001.02 | In-house Method | Viscosity with Falling Ball Viscometer | Polymers (Resins; Fibers) | General | 10/25/19 |
| RH/l/001.01 | In-house Method | Determination of Storage and Loss Modulus | Polymers (Resins; Fibers) | General | 10/24/97 |
| RH/l/003.01 | Based on DIN 53014 | Determination of Shear Viscosity of PET at High Shear Rates | Polymers (Resins; Fibers) | Synthetic Fiber | 10/24/97 |
| DIN 53014-1 (1994-02): Viscometry - Capillary Viscometers for Determining Flow Curves; Fundamentals, Terms, Definitions | |||||
| DIN 53014-2 (1994-02): Viscometry - Capillary Viscometers for Determining Flow Curves; Systematic Deviations, Causes and Corrections | |||||
| RH/l/005.01 | In-house Method | Determination of Storage, Loss Modulus and Viscosity of PET | Polymers (Resins; Fibers) | Synthetic Fiber | 10/24/97 |
| RH/l/007.01 | In-house Method | Determination of OSTIM Viscosity | Inorganic and Organic Chemicals (Additives) | Medical Technology | 12/11/01 |
| Test Area: Application Technology Testing | |||||
| Test Group: Rheological Properties | |||||
| Test Type: Rheology | |||||
| Test Scope: Rheological Properties of Polymer Solutions and Polymer Melts [Flex C] | |||||
| SAA Number | Standard | Test Method | Test Object | Application | Date |
|---|---|---|---|---|---|
| CL/r/002.03 | In-house Method | Brookfield Viscosity | Polymers (Resins; Fibers) | General | 10/25/19 |
| DIN ISO 1652 (2013-02): Rubber Latex - Determination of Viscosity by the Brookfield Method (ISO 1652:2011) | |||||
| CL/r/003.03 | In-house method | Höppler Viscosity | Inorganic and organic chemicals (additives) | general | 2019-10-25 |
| DIN 53015 (2019-06): Viscometry - Measurement of viscosity with the Höppler falling ball viscometer | |||||
| PC/x/017.02 | DIN EN ISO 1133 | Determination of melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics using a flow testing device | Polymers (resins; fibers) | general | 2025-04-17 |
| DIN EN ISO 1133-1 (2012-03): Determination of melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics | |||||
| DIN EN ISO 1133-1 (2022-10): Determination of melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics | |||||
| ASTM D1238 (2020): Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer | |||||
| Test Area: Application-oriented tests | |||||
| Test Group: Other material- or product-specific properties | |||||
| Test Type: Environmental simulation tests | |||||
| Test Scope: Not accredited | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| PC/p/032.01 | various standards | Evaluation of lightfastness standard for cyclic exposure tests | Polymers (resins; fibers) | general | 2018-03-13 |
| Test Area: Application-oriented tests | |||||
| Test Group: Other material- or product-specific properties | |||||
| Test Type: Environmental simulation tests | |||||
| Test Scope: Environmental simulation tests for mechanical, climatic, and chemical aging of plastics [Flex B] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/x/023.01 | VDA 675-244 | Interactions between copper and elastomers with gasoline | Polymers (resins; fibers) | Automotive | 2021-06-02 |
| VDA 675-244 (2013-12): Elastomer components in motor vehicles - Test methods for property determination - Interaction between copper and elastomers in fuel | |||||
| PC/p/001.04 | various standards | Exposure and weathering test with xenon weathering devices | Polymers (resins; fibers) | general | 2019-09-19 |
| 50451/01 (2012-03): Accelerated ageing in sunlight | |||||
| AA-0235 (2017-04): Short-term weathering in xenon test device – Crack resistance | |||||
| AA-0236 (2017-03): Short-term weathering in xenon test device - Color fastness | |||||
| AA-P 288 (2006-06): Accelerated weathering colour stability | |||||
| AATCC 169 (2010): Weather Resistance of Textiles: Xenon Lamp Exposure | |||||
| BMW AA-0419 (2018-08): Soiling behavior and cleanability of leather | |||||
| BO 150-02 (2001-04): RESISTANCE OF TEXTILES TO ACCELERATED AGEING BY XENON ARC | |||||
| D47 1431 (2011-12): MATERIALS AND PASSENGER COMPARTMENT PARTS - BEHAVIOUR OF THE APPEARANCE TO ARTIFICIAL LIGHT AT HIGH AND MEDIUM TEMPERATURES | |||||
| DBL 5555 (2014-04): Finished parts and semi-finished products made of organic polymer materials - General conditions and test methods | |||||
| DBL 7382 No. 8.22 and 9.23 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 Pkt. 8.15 (2017-11): Coating of plastic parts in vehicle interiors | |||||
| DIN 75202 (1988-12): Determination of lightfastness of materials for automotive interior trim with xenon arc light | |||||
| DIN EN ISO 105-B02 (2014-11): Textiles – Color fastness tests – Part B02: Color fastness to artificial light: Xenon arc light | |||||
| DIN EN ISO 105-B06 (2004-07): Textiles – Color fastness tests – Part B06: Color fastness and aging to artificial light at high temperatures: Test with xenon arc lamp | |||||
| DIN EN ISO 105-B06 (2020-12): Textiles - Color fastness tests - Part B06: Color fastness and aging to artificial light at high temperatures: Test with xenon arc lamp | |||||
| DIN EN ISO 12402-7 (2007-03): Materials and components - Safety requirements and test methods - Section 4.1.6.4 Accelerated weathering | |||||
| DIN EN ISO 12402-7 (2021-04): Personal flotation devices – Part 7: Materials and components - Safety requirements and test methods - Section 4.1.6.4 Accelerated weathering | |||||
| DIN EN ISO 4892-2 (2013-06): Plastics – Artificial irradiation or weathering in apparatus – Part 2: Xenon arc lamps | |||||
| DIN EN ISO 4892-2 (2021-11): Plastics – Artificial irradiation or weathering in apparatus | |||||
| FLTM BO 116-01 (2018-03): FORD LABORATORY TEST METHOD - RESISTANCE TO INTERIOR WEATHERING | |||||
| GME 60292 (2000-08): Determination of Colour Fastness and Resistance to Aritificial Light | |||||
| GMW 14162 (2016-11): Colorfastness to Artificial Weathering | |||||
| ISO 3865 (2005-07): Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material | |||||
| J2412 (2015-08): Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus | |||||
| J2527 (2017-09): Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus | |||||
| MBN 10505 (2014-04): Non-metallic materials - Weathering in humid-warm climate | |||||
| MBN 10506 (2014-04): Non-metallic materials - Weathering in dry-hot climate | |||||
| MBN 55555-5 (2018-08): Non-metallic materials, material systems and semi-finished products Part 5: Weathering tests | |||||
| PV 1303 (2015-11): Non-metallic materials - Exposure test for automotive interior components | |||||
| PV 1303 (2021-05): Non-metallic materials - Exposure test for automotive interior components | |||||
| PV 1306 (2008-02): Non-metallic materials - Exposure test for determining tackiness on PP plastics | |||||
| PV 1502 (2016-11): Clear coat for 2-layer metallic paints - Test for crack resistance | |||||
| PV 3929 (2018-03): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3929 (2021-04): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3929 (2023-01): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3930 (2017-11): Non-metallic materials - Weathering in humid-warm climate (Exterior) | |||||
| PV 3930 (2023-01): Non-metallic materials - Weathering in humid-warm climate (Exterior) | |||||
| STD 3159 (1994-10): UV resistance, Xenon lamp | |||||
| STD 423-0047 (2013-12): Light exposure at 100 °C | |||||
| STD 423-0061 (2015-08): Light exposure at 75 °C | |||||
| TL 591 (2015-02): Organic glasses for luminaires – Material requirements | |||||
| VDA 675-242 (1992-12): Discoloration of organic materials by elastomers (paint indifference) | |||||
| VDA 75202 (2001-08): Color fastness test and aging behavior against light at high temperatures - Xenon arc light | |||||
| VW 96147 = PTL 4061 (2009-10): Body - Slide-coated body seals | |||||
| PC/p/002.01 | various standards | Cross-cut test | Polymers (resins; fibers) | Automotive | 2010-06-16 |
| 9.55455 (2001-07): FLOCKING ON NON-METALLIC MATERIALS | |||||
| AA-0026 (2018-03): Aging resistance test | |||||
| AA-0180 (2018-11): Cross-cut test | |||||
| AA-0203 (2011-07): Hydrolysis test | |||||
| AA-0213 (2018-02): Condensation water constant climate test | |||||
| AA-P 177 (2008-11): Cross-cut test | |||||
| AA-P 276 (2006-05): Thermal cycling test | |||||
| ASTM D3359 (2002-08): Standard Test Methods for Measuring Adhesion by Tape Test | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings, and functional parts in exterior applications | |||||
| DBL 7382 No. 8.4, referring to 9.4 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7382 No. 8.9.7, referring to 9.4 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 Sec. 8.1.5 (2013-03): Coating of plastic components in vehicle interiors | |||||
| DBL 7384 Sec. 8.5 (2017-11): Coating of plastic components in vehicle interiors | |||||
| DIN EN ISO 2409 (2013-06): Coating materials – Cross-cut test | |||||
| DIN EN ISO 2409 (2020-12): Coating materials – Cross-cut test | |||||
| FLTM BI 104-01 (2003-01): WATER IMMERSION TEST FOR PAINTED PARTS AND PANEL | |||||
| FLTM BI 106-01 (2002-07): PAINT ADHESION TEST | |||||
| GME 60401 (2007-10): Cross Hatch Test of Organic Coatings | |||||
| GMW 14829 (2011-01): Tape Adhesion Test for Paint Finishes | |||||
| GS 94007 (2018-08): Coatings on plastic parts – Painted plastic parts – Requirements and tests | |||||
| MBN 10494-5 (2021-10): Paint technology test methods – Part 5: Technical-mechanical tests | |||||
| PR 303.5 (2010-01): Climatic cycle test for interior trim parts | |||||
| TL 211 - Sec. 2.1 (2016-11): Coating on exterior plastic components - Requirements | |||||
| TL 226 - Sec. 2.1 (2018-04): Coatings on vehicle interior materials - Requirements | |||||
| TL 226 (2020-10): Coatings on vehicle interior materials | |||||
| TL 52447 (2019-04): Flocking of interior trim material | |||||
| TL 528 - Sec. 3.1 (2015-01): Chrome-plated plastic components – Material requirements | |||||
| VCS 1029,54729 (2017-12): Adhesion, cross-cut test | |||||
| VDA 621-411 (1985-03): Adhesion of coatings - Cross-cut test | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| PC/p/003.01 | various standards | Cream resistance of painted surfaces in vehicle interiors | Polymers (Resins; Fibers) | Automotive | 5/25/10 |
| PA-P 295 (2004-03): Paint compatibility of painted interior surfaces with sunscreen cream | |||||
| PR 556 (2014-03): Resistance of unpainted thermoplastic interior surfaces to creams | |||||
| PTL 5538 (2018-10): Interior, surface finishes - Wood/ Carbon/ Metals | |||||
| PV 3964 (2008-02): Vehicle interior surfaces - Cream resistance test | |||||
| PC/p/004.02 | various standards | Heat aging of molded parts made from thermoplastic molding compounds | Polymers (Resins; Fibers) | Automotive | 10/29/12 |
| D45 1139 PSA (2006-06): TRIM MATERIALS - DIMENSIONAL VARIATIONS AND CHANGE IN APPEARANCE WHEN SUBJECTED TO HEAT | |||||
| D45 1234 PSA (2008-11): PARTS CONTAINING PLASTIC ELEMENTS - REACTION TO HEAT IN A NON-RADIANT DRY OVEN | |||||
| DBL 5404 section 7.7 (2016-05): Thermoplastic components for direct and indirect passenger compartment areas, for passenger compartment heating, ventilation, trim panels, and housings | |||||
| DIN 53377 (2007-10): Testing of plastic films – Determination of dimensional change | |||||
| DIN 53497 (2017-04): Testing of plastics – Heat aging test on molded parts made from thermoplastic molding compounds, without external mechanical stress | |||||
| KEUR 00821-020 (1982-06): Dimensional stability of plastic parts at elevated temperatures without external mechanical loading | |||||
| NES M0131: PARTS CONTAINING PLASTIC ELEMENTS - REACTION TO HEAT IN A NON-RADIANT DRY OVEN | |||||
| NES M0132: Methods of Thermal Cycle Testing for Plastic Parts | |||||
| PC/p/005.03 | various standards | Coating resistance of plastic surfaces | Polymers (Resins; Fibers) | Automotive | 10/23/12 |
| AA-0053 (2010-04): Resistance of painted interior surfaces to sunscreen | |||||
| BI 106-01 (2002-07): PAINT ADHESION TEST | |||||
| CMT0021 (2009-03): PAINT ADHESION TEST | |||||
| DBL 5306 (2008-12): Supply specification - General technical delivery conditions and test methods for interior trim materials and similar products | |||||
| DBL 5416 (2017-08): Thermoplastic components for trim panels, housings, and functional parts in exterior applications | |||||
| DBL 7382 No. 8.7, referring to 9.7 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7382 No. 8.9.6, referring to 9.7 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 - Sec. 8.10 (2017-11): Coating of plastic components in vehicle interiors | |||||
| DBL 7384 Appendix 7.5.2 (2013-03): Coating of plastic components in vehicle interiors | |||||
| DBL 7384 Sec. 8.1.5 (2013-03): Coating of plastic components in vehicle interiors | |||||
| DBL 7384 Sec. 8.12 (2017-11): Coating of plastic components in vehicle interiors | |||||
| DBL 7384 Sec. 8.6 (2017-11): Coating of plastic components in vehicle interiors | |||||
| DIN EN ISO 10289 (2001-04): Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates | |||||
| DIN EN ISO 1518-1 (2011-09): Coating materials - Determination of scratch resistance - Part 1: Method with constant load | |||||
| DIN EN ISO 2409 (2013-06): Coating materials - Cross-cut test | |||||
| DIN EN ISO 2409 (2020-12): Coating materials – Cross-cut test | |||||
| DIN EN ISO 4628-2 (2016-07): Coating materials - Assessment of coating degradation | |||||
| DIN EN ISO 4628-4 (2016-07): Coating materials – Assessment of coating degradation – Evaluation of the quantity and size of defects and the intensity of uniform changes in appearance – Part 4: Assessment of degree of cracking | |||||
| GS 94007 (2018-08): Coatings on plastic parts – Painted plastic parts – Requirements and tests | |||||
| GS 97034-9 (2015-09): Surface testing of automotive interior materials – Scratch test | |||||
| MBN 10494-5 (2021-10): Paint technology test methods – Part 5: Technical-mechanical tests | |||||
| PTL 5525 (2010-01): Body exterior parts made of hard plastics (Thermoplastics and Duroplastics) | |||||
| PTL 5536 (2018-10): Surface finishes of the vehicle interior - Coatings / Printing / Films / Thin-film systems | |||||
| PTL 5538 and VW 96184 (2018-10): Interior - Surface finishes - Wood/ Carbon/ Metals | |||||
| TL 226 - Sec. 6 (2018-04): Coatings on vehicle interior materials – Requirements | |||||
| TL 226 - Sec. 6 (2020-10): Coatings on vehicle interior materials - Requirements | |||||
| TL 52038 (2019-07): Material requirements for adhesive labels | |||||
| TL 52038 (2019-12): Adhesive labels – Material requirements | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| TL 528 (2015-01): Chrome-plated plastic components – Material requirements | |||||
| VCS 1029,54739 (2005-09): Adhesion | |||||
| PC/p/006.02 | various standards | Determination of thickness of machine-made textile floor coverings | Textiles | general | 7/16/12 |
| D45 1195 (2011-10): FLEXIBLE MATERIALS - THICKNESS AND COMPRESSIBILITY | |||||
| D45 1195 PSA (2009-09): FLEXIBLE MATERIALS - THICKNESS AND COMPRESSIBILITY | |||||
| DIN 53370 (2008-11): Testing of plastic films – Determination of thickness by mechanical scanning | |||||
| DIN ISO 3415 (2011-04): Textile floor coverings - Determination of thickness loss after short, moderate static loading | |||||
| DIN ISO 5084 (1996-10): Determination of thickness of textiles and textile products | |||||
| ISO 1765 (1986-11): Machine-made textile floor coverings - Determination of thickness | |||||
| PC/p/007.03 | various standards | Mass per unit area / Grammage | Textiles | Automotive | 11/5/12 |
| D45 1012 (2014-04): SHEET MATERIALS - SURFACE MASS | |||||
| DIN EN 12127 (1997-12): Textile fabrics - Determination of mass per unit area using small specimens | |||||
| DIN EN 29073-1 (1992-08): Test methods for nonwovens - Part 1: Determination of mass per unit area | |||||
| DIN EN ISO 2286-2 (1998-07): Textiles coated with rubber or plastics - Determination of roll characteristics - Part 2: Determination of total mass per unit area, mass per unit area of coating, and mass per unit area of backing | |||||
| PC/p/008.04 | Various OEM test specifications | Media resistance | Polymers (Resins; Fibers) | Automotive | 9/13/12 |
| AA-0055 (2010-06): Resistance testing of surfaces to chemicals | |||||
| AA-0055 (2018-05): Resistance testing of surfaces to chemicals | |||||
| AA-0055 (2021-04): Resistance testing of surfaces to chemicals | |||||
| AA-0134 (2011-02): Dry scratch resistance using a Crockmeter | |||||
| AA-0244 (2009-09): Paint compatibility test | |||||
| AA-P 194 (2008-08): Resistance test of surfaces to chemicals | |||||
| AA-P 257 (2008-07): Resistance of painted interior surfaces to sunscreen | |||||
| BI 104-01 (2003-01): WATER IMMERSION TEST FOR PAINTED PARTS AND PANEL | |||||
| BI 113-06 (2002-03): TEST METHOD FOR RESISTANCE TO PERSPIRATION | |||||
| BI 113-08 (2006-09): RESISTANCE TO SUNSCREEN LOTION AND INSECT REPELLENT | |||||
| BMW QV 36009 (2016-11): Testing of the surface quality of wheels | |||||
| BN 103-01 (2001-09): RESISTANCE OF COATED FABRICS AND PLASTIC FILM TO MIGRATION STAINING AND BLOCKING | |||||
| BN 112-08 (2015-08): SOILING & CLEANABILITY TEST FOR INTERIOR TRIM MATERIALS | |||||
| BO 101-05 (2001-03): DETERMINATION OF FUEL RESISTANCE OF PLASTIC PARTS | |||||
| CMT0021 (2009-03): PARTS AND COMPONENTS – DETERMINATION OF THE RESISTANCE TO ATTACK BY PERSPIRATION | |||||
| DBL 5399 (2007-04): Soiling / Cleaning of interior trim parts / materials | |||||
| DBL 5404 section 7.14 (2016-05): Parts made of thermoplastic materials for the direct and indirect areas of the passenger compartment, for passenger compartment heating, ventilation, trim panels, and housings | |||||
| DBL 5416 (2017-07): Parts made of thermoplastic materials for trim panels, housings, and functional parts in exterior applications | |||||
| DBL 5422.50 (2019-10): Window seals | |||||
| DBL 5428 (2019-11): Scratch-resistant coatings for plastic parts in vehicle exteriors and coatings on plastic parts for headlights | |||||
| DBL 5562.13 (2015-12): Components made of thermoplastic elastomers | |||||
| DBL 5571.50 (2015-10): Profiles and molded parts made of elastomers (EPDM) for bodywork | |||||
| DBL 5578.30 (2015-10): Friction-coated elastomer parts | |||||
| DBL 7382 No. 8.18, referring to 9.20 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 (2020-10): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.10 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 7384 Section 8.11 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 9202 (2019-10): Decorative and functional material composite systems in the interior | |||||
| DBL 9202.61 (2013-01): Supply Specification for Decorative Parts in the Passenger Compartment | |||||
| DBL 9202.70 (2013-01): Supply Specification for Decorative Parts in the Passenger Compartment | |||||
| DBL 9202.81 (2013-01): Supply Specification for Decorative Parts in the Passenger Compartment | |||||
| DIN EN 12720 (2014-02): Furniture – Assessment of the resistance of surfaces to cold liquids | |||||
| DIN EN ISO 2812-1 (2018-03): Coating materials – Determination of resistance to liquids – Part 1: Immersion in liquids other than water | |||||
| DIN EN ISO 2812-3 (2012-10): Coating materials – Determination of resistance to liquids – Part 3: Method using an absorbent material | |||||
| DIN EN ISO 2812-3 (2019-08): Coating materials - Determination of resistance to liquids - Part 3: Method using an absorbent material | |||||
| DIN EN ISO 2812-4 (2008-06): Coating materials – Determination of resistance to liquids – Part 4: Drop/stain method | |||||
| DIN EN ISO 2812-4 (2018-03): Coating materials – Determination of resistance to liquids – Part 4: Drop/stain method | |||||
| DIN EN ISO 4628-1 (2016-07): Coating materials – Evaluation of degradation of coatings – Assessment of quantity and size of defects and of intensity of uniform changes in appearance – Part 1: General introduction and rating system | |||||
| DIN EN ISO 4628-2 (2016-07): Coating materials - Evaluation of degradation of coatings – Assessment of quantity and size of defects and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering | |||||
| DVM-0036-MA (2003-09): Sunscreen Resistance Test | |||||
| DVM-0039-MA (2003-09): Insect Repellent Resistance | |||||
| Fiat 9.55253 – 2.17 (2006-08): MISCELLANEOUS PLASTIC COMPONENTS | |||||
| GM 9517P (1988-07): Resistance to synthetic perspiration | |||||
| GMI 60263 (1996-08): Determination of Resistance to sulphur dioxide staining of automotive trim components | |||||
| GMI 60264 (1996-08): Determination of Resistance to sulphide dioxide staining of automotive trim components | |||||
| GMW 14294 (2014-11): Determination of Resistance of Elastomer Profiles to Transit Coating (Protective Wax) Remover | |||||
| GMW 14296 (2011-04): Perspiration Resistance | |||||
| GMW 14334 (2013-06): Chemical Resistance to Fluids | |||||
| GMW 14445 (2011-08): Sunscreen and Insect Repellant Resistance | |||||
| GMW 14864 (2007-07): Procedure for Determining the Staining of Trim Materials Due to Sulfur Dioxide, SO2, and Hydrogen Sulfide, H2S | |||||
| GMW 15891 (2008-08): Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates | |||||
| GS 95003-5 (2001-10): Electrical/electronic assemblies in motor vehicles – Chemical requirements | |||||
| GS 95024-3-1 (2013-07): Electrical and electronic components in motor vehicles – Environmental requirements and tests | |||||
| GS 95024-3-1 (2019-08): Electrical and electronic components in motor vehicles – Environmental requirements and tests | |||||
| GS 97058 (2015-07): Self-adhesive labels | |||||
| ISO 16750-1 (2003-12): Road vehicles — Environmental conditions and testing for electrical and electronic equipment | |||||
| ISO 16750-5 (2010-04): Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads | |||||
| KEUR 00821-025 (2004-05): PARTS AND COMPONENTS – DETERMINATION OF THE RESISTANCE TO ATTACK BY PERSPIRATION | |||||
| KEUR 00824-825 (2007-01): PARTS AND COMPONENTS – DETERMINATION OF THE RESISTANCE TO ATTACK BY PERSPIRATION | |||||
| KEUR 00824-846 (1985-01): Resistance of coats of paint to attack by fluids (Immersion test) | |||||
| KEUR 00824-849 (1985-01): Resistance of coats of paint to attack by fluids (Drop test) | |||||
| LP-463PB-31-01 (2013-06): RESISTANCE TO VARIOUS FLUIDS | |||||
| MBN 15306-4 (2017-01): Test methods for material systems and components - Part 4: Resistance tests | |||||
| MBN LV 124, chapter 15 (2013-08): Electrical and electronic components in passenger cars up to 3.5t – General requirements, test conditions and tests, Part 2: Environmental requirements | |||||
| MBN LV 124-2 (2013-08): Electrical and electronic components in passenger cars up to 3.5t – General requirements, test conditions and tests Part 2: Environmental requirements | |||||
| NES M0133: TESTING METHODS OF CHEMICAL RESISTANCE FOR PLASTIC PARTS | |||||
| PN 710 (2013-07): Test media – Material compatibility | |||||
| PR 556 (2014-03): Resistance of unpainted thermoplastic surfaces in the interior to creams | |||||
| PR 557 (2016-10): Resistance of unpainted thermoplastic surfaces in the interior and exterior to media | |||||
| PR 557 (2018-09): Resistance of unpainted thermoplastic surfaces in the interior and exterior to media | |||||
| PSA B14 1841 (2007-08): RECOMMENDED AND REGULATED ELEMENTS ADHESIVED ON THE BODY INTERIOR | |||||
| PV 3922 (2009-07): Textile fabrics and molded parts - Oil and water repellent behavior | |||||
| PV 3936 (2017-11): Polymer materials - Resistance test against components of crankcase gases | |||||
| PV 3988 (2017-11): Painted body seals - Testing of friction coating | |||||
| Roche PVO 20308931 (2021-05): Non-functional surface quality | |||||
| STJLR.51.5262 (2018-02): Performance Requirements of Non-Decorated Plastics | |||||
| TL 226 (2016-10): Coatings on materials for vehicle interior trim – Requirements | |||||
| TL 226 (2018-04): Coatings on materials for vehicle interior trim – Requirements | |||||
| TL 226 (2020-10): Coatings on materials for vehicle interior trim | |||||
| TL 52447 (2006-06): Flocking of interior trim material | |||||
| TL 52447 (2019-04): Flocking of interior trim material | |||||
| TL 52660 (2019-09): Underbody applications - Engine shield capsule, stone chip protection, CW fairings in thermoplastic design | |||||
| TL 52685 (2020-10): Polyether PUR lightweight foam for engine compartment absorbers | |||||
| TL 591 (2015-02): Organic glass for lights – Material requirements | |||||
| TL 918300 (2010): Technical supply conditions for coating materials for rail vehicles | |||||
| TL 956 (2019-02): Exterior lights Europe / USA / Japan – Functional requirements | |||||
| TP-0000703 (2019-03): Chemical Resistance of Surfaces | |||||
| TPJLR.52.009 (2017-07): Assessment of Micro-scratch Performance - Linear Abrasion Method | |||||
| TPJLR.52.154 (2016-09): Determination of the Resistance to Fuel of Plastic Components | |||||
| TPJLR.52.155 (2018-08): Fluid Spotting of Automotive Trim | |||||
| TPJLR.52.156 (2012-04): Resistance of Interior Trim to Perspiration – Immersion Test | |||||
| TPJLR.52.209 (2009-03): Resistance to Migration Staining Using White, Unsupported Vinyl | |||||
| VDA 621-408 (1978-07): Testing of coatings for color change due to simulated oil soot exposure | |||||
| VDA 621-412 (1985-03): Chemical resistance of automotive coatings | |||||
| VW 75174 (2018-10): Automotive connectors – Tests | |||||
| VW 80000 (2021-07): Electrical and electronic components in motor vehicles up to 3.5 t | |||||
| VW 80000-C-01 (2017-10): Electrical and electronic components in motor vehicles up to 3.5 t - General requirements, test conditions and tests | |||||
| PC/p/009.02 | various standards | storage resistance in various media | Polymers (resins; fibers) | Automotive | 9/13/12 |
| AA-0053 (2010-04): Resistance of painted interior surfaces to sunscreen | |||||
| AA-P 275 (2006-05): Aging resistance test | |||||
| ASTM D 570 - 22 (2022): Standard Test Method for Water Absorption of Plastics | |||||
| ASTM D 570 - 98 (1998): Standard Test Method for Water Absorption of Plastics | |||||
| D 45 1333 (2010-01): MATERIALS INSIDE PASSENGER COMPARTMENT HORIZONTAL FLAMMABILITY | |||||
| DBL 5307 (2019-07): Flame retardancy of interior trim parts requirements and test specifications | |||||
| DBL 5410 (2020-03): Parts made of thermoplastic materials for operating devices, bearings and fasteners, spacers | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings and functional parts in exterior applications | |||||
| DBL 5462 (2013-11): Delivery specification for molded rigid and semi-rigid foams | |||||
| DBL 5555 (2014-04): Finished parts and semi-finished products made of organic polymer materials General conditions and test methods | |||||
| DBL 5556 (2013-03): Elastomer molded parts with normal mechanical requirements | |||||
| DBL 5562 (2015-12): Components made of thermoplastic elastomers | |||||
| DBL 7384 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 8465 (2019-05): Galvanized plastic parts with metallic coatings and additional coatings | |||||
| DIN EN 326-1 (1994-08): Wood-based panels - Sampling, cutting and control | |||||
| DIN EN ISO 13934-1 (2013-08): Textiles – Tensile properties of textile fabrics | |||||
| DIN EN ISO 2812-4 (2007-05): Paints and varnishes – Determination of resistance to liquids | |||||
| DIN EN ISO 4628-2 (2016-07): Paints and varnishes – Evaluation of degradation of coatings | |||||
| GM 9200P (1988-07): Accelerated aging and steaming | |||||
| GMW 14444 (2017-12): Materials Related Interior Part Performance | |||||
| GMW 14650 (2016-09): Performance Requirements for Exterior Plastic Parts | |||||
| GMW 3232 (2011-08): Test Method for Determining the Flammability of Interior Trim Materials | |||||
| GS 94007 (2018-08): Coatings on plastic parts Painted plastic parts requirements and tests | |||||
| KEUR 00824-843 (1980-01): Resistance to corrosion by moisture at elevated temperature. Water immersion test for painted parts | |||||
| LAK 60100 (2007-02): TOP PAINT COATINGS ON CHASSIS AND CHASSIS COMPONENTS | |||||
| MS 300-08 (2014-08): STANDARD TEST METHOD - FLAMMABILITY RESISTANCE FOR INTERIOR MATERIALS | |||||
| NES M0133 (2010-06): TESTING METHODS OF CHEMICAL RESISTANCE FOR PLASTIC PARTS | |||||
| PR/TS 231 (2015-07): PR Sealing system doors | |||||
| PV 3410 (2017-11): PUR flexible foam test methods | |||||
| PV 3904 (2000-02): Interior trim materials flame retardancy | |||||
| PV 3964 (2008-02): Surfaces in the vehicle interior testing of cream resistance | |||||
| PV 3983 (2020-12): Testing of media resistance in conjunction with mechanical stresses | |||||
| TL 211 (2016-11): Coating on exterior plastic parts requirements | |||||
| TL 226 (2018-04): Coatings on materials for vehicle interior trim requirements | |||||
| TL 496 (2016-10): ASSY Door/side panel material requirements | |||||
| TL 50105 (2010-06): Upholstery fabrics requirements, quality characteristics, tests | |||||
| TL 52013 (2015-09): PPE+PS polymer blend material requirements | |||||
| TL 52038 (2019-12): Adhesive labels – Material requirements | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| TL 52062 (2009-06): PA66, glass fiber reinforced, for finished parts material requirements | |||||
| TL 52065 (2017-02): Elastomer sealing material made of cellular rubber material requirements | |||||
| TL 52090 (2003-01): PP/EPDM polymer blend with glass fibers, finished parts material requirements | |||||
| TL 52311 (2021-08): ASA for unpainted components material requirements | |||||
| TL 52440 (2009-04): PA6, glass fiber reinforced, finished parts material requirements | |||||
| TL 52452 (2010-06): Polypropylene with increased crystallinity material requirements | |||||
| TL 52637 (2004-04): ASSY Pillar trims and sill plates material requirements | |||||
| TL 52649 (2008-01): Wheel arch liner, wheel housing scope of testing for material data sheets | |||||
| TL 52671 (2009-04): PMMA, high-gloss panels in exterior area material requirements | |||||
| TL 529/2 (2002-10): PUR, hydrolysis-resistant, finished parts material requirements | |||||
| TSM 0505G (2008-08): Smell Quality of Non-Metallic Materials | |||||
| TSM 5754G (2006-02): Thermoplastic Polyolefin Materials for Interior Parts | |||||
| VDA 675-310 (1992-12): Elastomer components in motor vehicles test methods for resistance testing heat aging | |||||
| VW 2.8.1 (2014-12): Elastomers material requirements and tests | |||||
| VW 44045 (2016-12): Polypropylene, finished parts material requirements | |||||
| VW 50123 (2015-09): Thermoplastic elastomers quality requirements | |||||
| VW 50125 (2017-12): Polyamide 6 for finished parts of the vehicle interior | |||||
| VW 50125 (2022-05): Polyamide 6 for finished parts of the vehicle interior | |||||
| VW 50127 (2013-04): Polyamide 66, finished parts of the vehicle interior material requirements | |||||
| VW 50127 (2021-07): Polyamide 66, finished parts of the vehicle interior | |||||
| VW 50133 (2015-08): PA66 for finished parts outside the vehicle interior material requirements | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| PC/p/011.01 | various standards | Visual assessment of color matching | Polymers (resins; fibers) | Automotive | 11/5/13 |
| VDA 621-409 (1985-03): Color comparison on pigmented systems | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings and functional parts in exterior applications | |||||
| PTL 4025 - Pkt. 6.3 (2017-05): Interior / Exterior - Surface decors - Plastic components with electrolytically deposited metal surface | |||||
| DBL 8465 (2019-05): Galvanized plastic parts with metallic coatings and additional coatings | |||||
| DBL 7384 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 7382 No. 8.1, referring to 9.1 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| FLTM BI 109-01 (2001-03): COLOR MATCHING WITH ARTIFICIAL LIGHT | |||||
| DIN EN ISO 3668 (2020-05): Paints and varnishes - Visual comparison of the color of coatings | |||||
| STD 423-0041 (2008-10): Colour assessment in light cabinet | |||||
| VCS 1026,51729 (2021-06): Assessment of colour in light booth | |||||
| PC/p/013.01 | various standards | Reflectometric or visual gloss determination | Polymers (resins; fibers) | Automotive | 11/5/13 |
| 50457 (1990-11): Tests for nonmetallic materials - Specular gloss determination for paints, varnishes and enamels by glossmeter | |||||
| 7-M0002 (2010-10): EVALUATING THE GLOSS OF PLASTICS | |||||
| AA-0101 (2010-10): Determination of the reflectometer value | |||||
| AA-0101 (2018-02): Determination of the reflectometer value | |||||
| AA-P 107 (2006-01): Determination of the reflectometer value | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings and functional parts in exterior applications | |||||
| DBL 7382 No. 8.2, referring to 9.2.1 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 Pkt. 8.3 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DIN 67530 (1982-01): Reflectometer as an aid for gloss assessment on flat paint and plastic surfaces | |||||
| DIN EN ISO 2813 (2015-02): Paints and varnishes – Determination of specular gloss at 20°, 60° and 85° | |||||
| DIN EN ISO 3668 (2001-12): Visual comparison of the color of coatings | |||||
| DIN EN ISO 3668 (2020-05): Paints and varnishes - Visual comparison of the color of coatings | |||||
| FLTM BI 110-01 (2001-03): MEASUREMENT OF THE GLOSS OF PAINT PANELS | |||||
| KEUR 00824-101 (2004-03): Measurement of the gloss | |||||
| PPV 4022 (2011-07): Limitation of surface defects | |||||
| PV 3929 Sec. 4.6.3 (2018-03): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3930 Sec. 4.6.3 (2017-11): Non-metallic materials - Weathering in humid-warm climate (Exterior) | |||||
| VW 50190 (2017-11): Vehicle interior components - Metrological assessment of color and gloss level - Visual assessment of chrome surfaces | |||||
| VW PV 3965 (2020-12): Decorative surfaces on and in the vehicle - Visual color matching according to DIN EN ISO 3668 | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| PC/p/015.01 | various standards | Crockmeter tests | Polymers (resins; fibers) | Automotive | 11/5/13 |
| BI 109-01 (2001-03): COLOR MATCHING WITH ARTIFICIAL LIGHT | |||||
| BI 161-01 (2019-08): MAR RESISTANCE DETERMINATION FOR HIGH GLOSS SURFACES | |||||
| BI 161-01 (2024-04): MAR RESISTANCE DETERMINATION FOR HIGH GLOSS SURFACES | |||||
| BN 107-01 (2007-02): CROCKING TEST | |||||
| D45 1010 (2005-12): MATERIALS AND PARTS IN POLYMER PASSENGER COMPARTMENT INNER AND OUTER - COLOUR FASTNESS TO RUBBING | |||||
| DBL 5404 (2016-05): Parts made of thermoplastic materials for the direct and indirect areas of the passenger compartment, for passenger compartment heating, passenger compartment ventilation, trim panels and housings | |||||
| DBL 5471 (2007-05): Supply specification - Trim and molded padding parts for vehicle interiors (Composite parts) | |||||
| DBL 5471 (2019-10): Trim and molded padding parts for vehicle interiors (Composite components) | |||||
| DBL 5575.20 (2019-04): Textile-flocked elastomer parts for body seals and plastic parts in the vehicle interior | |||||
| DBL 5578.30 (2015-10): Elastomer parts with slide coating | |||||
| DBL 7382 No. 8.17, referring to 9.19 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7382 No. 8.19, referring to 9.21 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 7384 Sec. 8.20 (2017-11): Coating of plastic parts in the vehicle interior | |||||
| DBL 9202 AA.30, 9.16 (2013-01): Supply specification for decorative parts in the passenger compartment | |||||
| DIN EN ISO 105-X12 (2016-11): Textiles – Color fastness tests – Part X12: Color fastness to rubbing | |||||
| DIN EN ISO 11640 (1998-12): Leather - Color fastness tests - Determination of rubbing fastness of dyes | |||||
| DIN EN ISO 11640 (2018-11): Leather - Color fastness tests - Determination of rubbing fastness of dyes | |||||
| GM 9033P (1988-10): COLORFASTNESS TO CROCKING (RUBBING) | |||||
| GS 97034-10 (2015-09): Surface testing of automotive interior materials - Scratch and abrasion resistance | |||||
| GS 97034-10 (2021-04): Surface testing of automotive interior materials - Scratch and abrasion resistance | |||||
| GS 97034-5 (2015-09): Surface testing of automotive interior materials - Resistance to cleaning and care products | |||||
| MBN 10494-5 (2016-03): Paint technology test methods - Part 5: Technical-mechanical tests | |||||
| MBN 55555-6 (2018-02): Non-metallic materials, material systems and semi-finished products Part 6: Mechanical tests | |||||
| MBN 55555-7 (2018-11): Non-metallic materials, material systems and semi-finished products Part 7: Resistance tests | |||||
| PR 506 (2006-09): Execution of a fingerprint test on surfaces of interior trim parts | |||||
| PTL 5536 (2018-10): Surface decors of the vehicle interior - Paints / Printing / Foils / Thin-film systems | |||||
| PTL 5538 (2018-10): Interior, surface decors - Wood/ Carbon/ Metals | |||||
| PV 3906 (2009-07): Non-metallic sheet materials - Testing of abrasion behavior | |||||
| PV 3906 (2018-12): Non-metallic sheet materials - Testing of abrasion behavior | |||||
| PV 3906 (2021-11): Non-metallic sheet materials - Testing of abrasion behavior | |||||
| PV 3932 (2006-05): Flocked plastic parts, abrasion resistance | |||||
| PV 3987 (2016-11): Scuff resistance (micro-scratch resistance) of high-gloss surfaces in vehicle interiors | |||||
| TL 226 (2020-10): Coatings on materials of vehicle interior trim | |||||
| TL 52038 (2019-07): Material requirements for adhesive labels | |||||
| TL 52038 (2019-12): Adhesive labels – Material requirements | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| TL 52447 (2019-04): Flocking of interior trim material | |||||
| VW 50014 (2014-04): Interior - General requirements for components and semi-finished materials | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| PC/p/017.01 | various standards | Temperature shock resistance | Semi-finished products | Automotive | 9/13/12 |
| DBL 8465 - Sec. A6 (2019-05): Galvanized plastic parts with metallic coatings and additional coatings | |||||
| PTL 4025 - Sec. 6.5 (2017-05): Surface decors of plastic components with electrolytically deposited metal surface (Heat storage) | |||||
| PC/p/018.01 | various standards | Visual assessment of paint discoloration | Polymers (resins; fibers) | Automotive | 11/5/13 |
| DIN ISO 3865 (2020-01): Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material | |||||
| GS 93011-7 (2002-12): Method for determining the discoloration of organic materials by elastomers (Paint indifference) | |||||
| ISO 3865 (2005-07): Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material | |||||
| PV 3929 (2018-03): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| TL 52703 (2012-06): Static body seals and molded corners made of TPE - Quality requirements | |||||
| TL 52703 (2018-06): Static body seals and molded corners made of TPE and PP - Quality requirements | |||||
| TL 52704 (2013-05): EPDM body seals – Material requirements | |||||
| VDA 675-242 (1992-12): Elastomer components in motor vehicles - Test methods for property determination - Discoloration of organic materials by elastomers (Paint indifference) | |||||
| PC/p/019.01 | various standards | Salt spray test (corrosion behavior) | Semi-finished products | Automotive | 5/14/13 |
| ASTM B 117 (2011-10): Standard Practice for Operating Salt Spray (Fog) Apparatus | |||||
| ASTM B 117 (2019): Standard Practice for Operating Salt Spray (Fog) Apparatus | |||||
| BMW AA-0224 (2018-04): Corrosion cycle test | |||||
| BMW AA-0324 (2018-04): Salt spray test | |||||
| DBL 7382 section 8.9 and 9.6 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 9440 (2017-06): Fasteners with metric thread - Surface protection and supplementary technical delivery conditions | |||||
| DIN EN 248 (2003-01): General requirements for electrolytic Ni-Cr coatings | |||||
| DIN EN 60068-2-11 (2000-02): Environmental tests Part 2: Tests Test Ka: Salt mist | |||||
| DIN EN ISO 11997 (2018-01): Coating materials – Determination of resistance under cyclic corrosion conditions | |||||
| DIN EN ISO 4628-3 (2016-07): Coating materials – Assessment of coating damage – Part 3: Assessment of degree of rusting | |||||
| DIN EN ISO 9227 (2017-07): Corrosion tests in artificial atmospheres – Salt spray tests | |||||
| DIN EN ISO 9227 (2023-03): Corrosion test in artificial atmospheres - Salt spray tests | |||||
| DIN EN ISO 9227 (2024-10): Corrosion test in artificial atmospheres - Salt spray tests | |||||
| GS 95024-3-1 (2019-08): Electrical and electronic components in motor vehicles - Environmental requirements and tests; K-07 | |||||
| MBN LV 124-2 (2013-08): Electrical and electronic components in passenger cars up to 3.5t – General requirements, test conditions and tests Part 2: Environmental requirements | |||||
| PV 1015 (2015-04): Contact corrosion by elastomers and plastics in conjunction with light metals - Testing of specific volume resistance | |||||
| PV 1209 (2016-02): Corrosion test (Climate corrosion cycle test) | |||||
| PV 1210 (2016-02): Body and add-on parts – Corrosion test | |||||
| TPJLR.52.252 (2010-04): Resistance To Neutral Salt Spray Corrosion Testing | |||||
| VDA 621-415 (1982-02): Paint technology tests - Testing of corrosion protection of automotive coatings under cyclic stress | |||||
| PC/p/020.01 | various standards | Drop test | Semi-finished products | Automotive | 9/13/12 |
| AK-LV 01 (2016-01): Airbag – Systems (Installation location: Steering wheel, instrument panel) Requirements and test conditions | |||||
| GS 95024-3-1 (2023-02): Electrical and electronic components in motor vehicles - Environmental requirements and tests | |||||
| PC/p/021.01 | various standards | Grey scale assessment | Semi-finished products, intermediate products | Automotive | 11/5/13 |
| DIN 53508 (2000-03): Testing of rubber and elastomers - Artificial aging | |||||
| DIN EN 20105-A02 (1994-10): Textiles - Colour fastness tests - Part A02; Grey scale for assessing colour change | |||||
| DIN EN 20105-A03 (1994-10): Textiles - Colour fastness tests - Part A03: Grey scale for assessing staining | |||||
| DIN EN ISO 105-A03 (2020-02): Textiles - Colour fastness tests - Part A03: Grey scale for assessing staining | |||||
| DIN EN ISO 105-B06 (1998-11): Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test | |||||
| DIN EN ISO 4628-1 (2016-07): Paints and varnishes – Evaluation of degradation of coatings – Assessment of quantity and size of defects and intensity of uniform changes in appearance – Part 1: General introduction and rating system | |||||
| ISO 105-A03 (2005-10): Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining | |||||
| MBN 10505 (2014-04): Non-metallic materials - Weathering in humid-warm climate | |||||
| MBN 10506 (2014-04): Non-metallic materials - Weathering in dry-hot climate | |||||
| PR 306.5 (2014-04): Solar simulation for interior trim parts | |||||
| PV 3929 (2018-03): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3930 Clause 4.6.1 (2017-11): Non-metallic materials - Weathering in humid-warm climate (Exterior) | |||||
| VCS 1026,82019 (2013-11): Grey scale – assessment of changes in colour | |||||
| PC/p/022.02 | various standards | Visual inspection of treated components (painted/unpainted) | Polymers (resins; fibers) | Automotive | 9/27/18 |
| DBL 7384 Annex 7.5.1 (2013-03): Coating of plastic parts in vehicle interior | |||||
| DIN 34804 (2002-10): Degrees of change of black surfaces | |||||
| DIN EN 248 (2003-01): General requirements for electrolytic Ni-Cr coatings | |||||
| DIN EN ISO 4628-1 (2016-07): Paints and varnishes – Evaluation of degradation of coatings – Assessment of quantity and size of defects and intensity of uniform changes in appearance – Part 1: General introduction and rating system | |||||
| DIN EN ISO 4628-3 (2016-07): Paints and varnishes – Evaluation of degradation of coatings – Part 3: Assessment of degree of rusting | |||||
| DIN EN ISO 4628-8 (2013-03): Paints and varnishes – Evaluation of degradation of coatings – Part 8: Assessment of delamination and corrosion around a scribe or other artificial defect | |||||
| DIN EN ISO 4892-2 (2013-06): Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps | |||||
| GMW 6992 (2002-04): Visual Evaluation of Automotive Trim | |||||
| PR 306.5 (2014-04): Solar simulation for interior trim parts | |||||
| PTL 5538 (2018-10): Interior, surface finishes - Wood/ Carbon/ Metals | |||||
| PV 1210 (2016-02): Body and add-on parts - Corrosion test | |||||
| STD 3816 (1994-12): Grading scales for environmental zone related requirements | |||||
| TL 226 (2020-10): Painting on materials for vehicle interior trim | |||||
| TL 496 (2016-10): ZSB Door/side trim | |||||
| TL 52231 (2016-12): Polymer blends of ABS and PC - Material requirements | |||||
| TL 52311 (2013-07): ASA graft polymer - Material requirements | |||||
| TL 52311 (2021-08): ASA for unpainted components - Material requirements | |||||
| TL 52685 (2020-10): Polyether PUR lightweight foam for engine compartment absorbers | |||||
| VW 44045 (2021-09): Polypropylene, finished parts | |||||
| VW 50123 (2015-09): Thermoplastic elastomers - Quality requirements | |||||
| VW 50125 (2017-12): Polyamide 6, finished parts for vehicle interior | |||||
| VW 50125 (2022-05): Polyamide 6, finished parts for vehicle interior | |||||
| VW 50127 (2013-04): Polyamide 66, finished parts for vehicle interior - Material requirements | |||||
| VW 54045 (2020-09): PP for finished parts in chassis and power train area | |||||
| PC/p/023.01 | various standards | Abrasion resistance of high-gloss surfaces and textile fabrics (Martindale) | Textiles | general | 1/15/14 |
| BMW AA-0412 (2017-05): Abrasion test on leather using a ball plate | |||||
| DIN EN ISO 12945-2 (2000-11): Textiles - Determination of fabric propensity to surface fuzzing and pilling – Part 2: Modified Martindale method | |||||
| DIN EN ISO 12945-2 (2021-04): Textiles – Determination of the propensity of textile fabrics to pilling, fuzzing or matting on the surface – Part 2: Modified Martindale method | |||||
| DIN EN ISO 12947-1 (2007-04): Textiles – Determination of the abrasion resistance of textile fabrics by the Martindale method – Part 1: Martindale abrasion testing apparatus | |||||
| PV 3975 (2010-12): Abrasion resistance of high-gloss surfaces in vehicle interior | |||||
| VDA 230-210 (2008-12): Upholstery fabric - Hook-and-loop fastener test | |||||
| PC/p/024.01 | various standards | Soiling behavior and cleanability of surface materials using the Martindale method | Semi-finished products, intermediate products | Automotive | 1/15/14 |
| BMW AA-0419 (2018-08): Soiling behavior and cleanability of leather | |||||
| DIN EN ISO 12947-1 (2007-04): Textiles – Determination of the abrasion resistance of textile fabrics by the Martindale method – Part 1: Martindale abrasion testing apparatus | |||||
| GS 97034-6 (2015-09): Surface testing of automotive interior materials - Soiling behavior and cleanability | |||||
| PR 121.2 (2003-07): Soiling behavior and cleanability of surface materials | |||||
| PR 121.3 (2012-01): Soiling behavior and cleanability of surface materials | |||||
| PV 3356 (2004-05): Textiles and foils - Soiling and cleaning behavior | |||||
| PV 3968 (2018-06): Leather - Soiling behavior | |||||
| PC/p/025.01 | various standards | Taber abrasion resistance | Semi-finished products, intermediate products | general | 1/15/14 |
| ASTM D4060 (2010-02): Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser | |||||
| BN 108-02 (2001-09): RESISTANCE TO ABRASION - TABER ABRASER | |||||
| DIN EN 438-2 (2005-04): Decorative high-pressure laminates (HPL), Part 2: Determination of properties | |||||
| DIN EN 438-2 (2019-03): Decorative high-pressure | |||||
| DIN EN ISO 5470-1 (1999-09): Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader | |||||
| DIN EN ISO 5470-1 (2017-04): Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader | |||||
| KEUR 00822-116 (2006-01): COVERING MATERIALS - DETERMINATION OF THE RESISTANCE TO WEAR | |||||
| SAE J365 (2004-04): Method of Testing Resistance to Scuffing of Trim Materials | |||||
| SAE J948 (2003-12): Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth | |||||
| SES N 3243 (2015-10): Painting Quality of Plastics Parts | |||||
| PC/p/026.01 | various standards | Abrex abrasion test | Semi-finished products, intermediate products | general | 1/15/14 |
| AA-0471 (2014-09): Abrasion resistance with Abrex standard testing device | |||||
| AA-0635 (2015-02): Assessment scheme for various surface tests of automotive interior materials | |||||
| AA-P 296 (2006-01): Abrasion resistance with Abrex standard testing device | |||||
| ASTM D4060 (2019-10): Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser | |||||
| DBL 7384 Clause 8.13 (2017-11): Coating of plastic parts in vehicle interior | |||||
| DBL 8465 (2019-05): Galvanized plastic parts with metallic coatings and additional coatings | |||||
| DBL 9202 (2019-10): Decorative and functional material composite systems in the interior | |||||
| DIN EN 60068-2-70 (1996-07): Environmental testing - Part 2: Tests - Test Xb: Test for resistance of markings and inscriptions to abrasion caused by rubbing with fingers and hands | |||||
| GS 94011 (2016-06): Test media and test aids | |||||
| GS 97034-1 (2015-09): Surface testing of automotive interior materials - Hand abrasion test | |||||
| GS 97034-1 (2021-04): Surface testing of automotive interior materials - Hand abrasion test | |||||
| GS 97034-2 (2015-09): Surface testing of automotive interior materials Fingernail test | |||||
| GS 97034-2 (2021-04): Surface testing of automotive interior materials - Fingernail test | |||||
| GS 97034-3 (2015-09): Surface testing of automotive interior materials Shoe sole test | |||||
| GS 97034-3 (2021-04): Surface testing of automotive interior materials - Shoe sole test | |||||
| GS 97034-4 (2015-09): Surface testing of automotive interior materials Color abrasion behavior | |||||
| GS 97034-4 (2021-04): Surface testing of automotive interior materials - Color abrasion behavior | |||||
| GS 97034-5 (2015-09): Surface testing of automotive interior materials Resistance to cleaning and care agents | |||||
| GS 97034-5 (2021-04): Surface testing of automotive interior materials - Resistance to cleaning and care agents | |||||
| GS 97034-6 (2015-09): Surface testing of automotive interior materials Soiling behavior and cleanability | |||||
| GS 97034-6 (2021-04): Surface testing of automotive interior materials - Soiling behavior and cleanability | |||||
| GS 97102 (2015-07): Coatings by physical vapor deposition (PVD) on stainless steel surfaces and chrome-plated surfaces Requirements and tests | |||||
| PC/p/027.01 | various standards | Thermal treatment of materials in the overpressure range using autoclaves | Semi-finished products, intermediate products | general | 1/15/14 |
| DBL 5468 (2015-12): Polyurethane integral foam for interior trim parts | |||||
| DIN EN ISO 2440 (2015-02): Flexible and rigid foams – Accelerated aging test | |||||
| PC/p/028.01 | various standards | Sunlight simulation | Polymers (resins; fibers) | Automotive | 7/2/14 |
| DBL 7382 No. 8.23, referring to 9.2.4 (2010-06): Supply Specification Coating of Metallic Parts in Vehicle Interiors | |||||
| DBL 9202 (2019-10): Decorative and functional material composite systems in the interior | |||||
| DBL 9202.81 (2013-01): Supply specification for decorative parts in the passenger compartment | |||||
| DIN 75220 (1992-11): Aging of automotive components in solar simulation systems | |||||
| PR 306.4 (2001-09): Solar simulation for trim parts | |||||
| PR 306.5 (2014-04): Solar simulation for trim parts | |||||
| PC/p/029.01 | various standards | Documentation of test parts for automotive tests according to Daimler specifications | Semi-finished products, intermediate products | Automotive | 2/28/17 |
| DBL 5471 (2007-05): Tests according to Daimler specifications | |||||
| PC/p/031.01 | various standards | Determination of colorimetric values (color measurement) | Semi-finished products, intermediate products | Automotive | 1/12/18 |
| 7-M0001 (2010-10): COLOUR EVALUATION ON AESTHETIC SURFACES IN PLASTIC | |||||
| AA-0354 (2011-07): Technical understanding of color measurement and metrological release of basic approvals and batch reference panels | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings, and functional parts in exterior applications | |||||
| DIN 5033-3 (1992-07): Colorimetry - Colorimetric values | |||||
| DIN 5033-7 (2014-10): Colorimetry – Part 7: Measurement conditions for object colors | |||||
| DIN 53236 (2018-02): Colorants - Measurement and evaluation conditions for the determination of color differences in coating materials, similar coatings, and plastics | |||||
| DIN 6174 (2007-10): Colorimetric determination of colorimetric values and color differences in the approximately uniform CIELAB color space | |||||
| DIN EN ISO 11664-4 (2012-06): Colorimetry - Part 4: CIE 1976 L*a*b* color space | |||||
| DIN EN ISO 11664-4 (2020-03): Colorimetry - Part 4: CIE 1976 L*a*b* color space | |||||
| DIN EN ISO 2813 (2015-02): Coating materials – Determination of gloss value at 20°, 60°, and 85° | |||||
| DIN EN ISO 3668 (2020-05): Coating materials – Visual comparison of the color of coatings | |||||
| ISO 7724-3 (1984-10): Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences | |||||
| LP.7M029 (2014-10): Color evaluation on aesthetic surfaces | |||||
| PV 3929 Pkt. 4.6.2 (2018-03): Non-metallic materials - Weathering in dry-hot climate (Exterior) | |||||
| PV 3930 Pkt. 4.6.2 (2017-11): Non-metallic materials - Weathering in humid-warm climate (Exterior) | |||||
| VDA 621-409 (1985-03): Coating technical tests - Color comparison on pigmented systems | |||||
| VW 50190 (2011-01): Components of vehicle interior trim - Metrological assessment of color and gloss level - Visual assessment of chrome surfaces | |||||
| VW 50190 (2017-11): Components of vehicle interior trim - Metrological assessment of color and gloss level - Visual assessment of chrome surfaces | |||||
| VW PV 3965 (2006-04): Decorative surfaces on and in the vehicle - Visual color matching according to DIN EN ISO 3668 | |||||
| VW PV 3965 (2020-12): Decorative surfaces on and in the vehicle - Visual color matching according to DIN EN ISO 3668 | |||||
| PC/p/033.01 | various standards | Stone chip resistance of coatings | Polymers (resins; fibers) | general | 8/20/18 |
| AA-0079 (2010-04): Determination of stone chip resistance by multi-impact | |||||
| AA-0079 (2018-02): Determination of stone chip resistance by multi-impact | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings, and functional parts in exterior applications | |||||
| DIN EN ISO 20567-1 (2017-07): Coating materials – Testing of stone chip resistance of coatings – Part 1: Multi-impact test | |||||
| VW 80000 (2021-07): Electrical and electronic components in motor vehicles up to 3.5 t | |||||
| PC/p/034.01 | various standards | Structure determination using Orange Peel Meter (Wave-Scan) | Polymers (resins; fibers) | Automotive | 1/9/19 |
| AA-0257 (2010-04): Measurement of structure and gloss on painted surfaces | |||||
| TL 211 - Pkt. 1.4 (2016-11): Painting on plastic exterior parts - Requirements (Wave-Scan) | |||||
| PC/p/035.01 | various standards | High-pressure water jet resistance of coatings | Polymers (resins; fibers) | Automotive | 10/8/19 |
| BMW AA-0136 (2017-11): Testing of resistance to high-pressure water jet (steam jet test) | |||||
| DBL 5416 (2017-08): Parts made of thermoplastic materials for claddings, housings, and functional parts in exterior applications | |||||
| DIN EN ISO 16925 (2014-06): Coating materials – Testing the resistance of coatings to high-pressure water jet | |||||
| DIN EN ISO 16925 (2022-06): Coating materials – Testing the resistance of coatings to high-pressure water jet | |||||
| FLTM BO 160-04 (2004-01): RESISTANCE OF PAINTED PLASTIC PARTS TO HIGH PRESSURE CLEANING OPERATIONS | |||||
| GM 9531P (2012-06): Water Jet Tests | |||||
| TL 52038 (2019-12): Adhesive labels – Material requirements | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| VW PV 1503 (2018-10): Painting of metallic and non-metallic materials Steam jet test | |||||
| WSS-M2P190-B1 (2021-01): PAINT PERFORMANCE, VISIBLE/NON-VISIBLE INTERIOR PARTS, METAL SUBSTRATES | |||||
| Test area: Application engineering tests | |||||
| Test group: Assessment of performance characteristics | |||||
| Test type: Finished part tests | |||||
| Test scope: Testing of components (semi-finished products, intermediate products) for assessing performance characteristics | |||||
| SAA number | Standard | Test method | Test object | Application | Date |
|---|---|---|---|---|---|
| TP/f/001.02 | In-house method | Dimensional checks | Semi-finished products, intermediate products | general | 8/27/14 |
| DBL 5463 (2018-07): Lightweight multi-layer sound insulation for interior and exterior applications | |||||
| TL 52038 (2021-11): Adhesive labels – Material requirements | |||||
| TP/f/004.02 | In-house method | Layer thickness measurement using the magnetic induction method | Metals | general | 1/28/21 |
| DIN EN ISO 2178 (2016-11): Non-magnetic coatings on magnetic base metals - Measurement of coating thickness - Magnetic method | |||||
| TP/f/005.02 | In-house method | Assessment of Surface Texture - Stylus Profiling Method | Metals | general | 8/27/14 |
| DIN EN ISO 21920-2 (2022-12): Geometrical Product Specification (GPS) – Surface texture: Profiles – Part 2: Terms, definitions and surface texture parameters | |||||
| DIN EN ISO 21920-3 (2022-12): Geometrical Product Specification (GPS) – Surface texture: Profiles – Part 3: Specification operators | |||||
| DIN EN ISO 3274 (1998-04): Surface texture: Stylus method - Nominal characteristics of stylus instruments | |||||
| DIN EN ISO 4288 (1998-04): Surface texture: Stylus method - Rules and procedures for the assessment | |||||
| DIN EN ISO 4287 (2010-07): Geometrical Product Specification (GPS) – Surface texture: Stylus method – Terms, definitions and parameters of surface texture | |||||
| Test Area: Testing of materials and articles in contact with drinking water | |||||
| Test Group: Hygiene and Health Tests | |||||
| Test Type: Miscellaneous Wet Chemistry and Index Determinations | |||||
| Test Scope: Migration testing for the analytical determination of specific parameters of products made from organic materials that come into contact with drinking water [Flex A] | |||||
| SAA Number | Standard | Test Method | Test Item | Application | Date |
|---|---|---|---|---|---|
| CL/i/002.08 | DIN EN 1484:2019-04 (H 3) | TOC, DOC, and TNb in water, wastewater, and sludge samples | Water, Wastewater, Sludge | Water | 1/15/24 |
| (see also test methods for the Water specialist module – Sub-area 4/5: Group and sum parameters) | |||||
| CL/x/024.01 | In-house method | Qualitative Assessment of Foam Formation in an Aqueous Sample | Water | Chemicals | 12/2/21 |
| CL/x/025.01 | In-house method | Odor Threshold Value TON | Water | Chemicals | 1/17/22 |
| DIN EN 1420 (2016-05): Influence of organic materials on water intended for human consumption - Determination of odor and taste of water in piping systems | |||||
| CL/x/026.01 | In-house method | Coloration at 410 nm | Water | Chemicals | 1/17/22 |
| DIN EN ISO 7887 (2012-04): Method C Water quality - Examination and determination of color | |||||
| CL/x/027.01 | In-house method | Turbidity | Water | Chemicals | 1/17/22 |
| DIN EN ISO 7027-1 (2016-11): Water quality - Determination of turbidity - Part 1: Quantitative methods | |||||
| CL/x/028.03 | In-house method | Sample Preparation of Migration Waters | Water | Water | 6/22/22 |
| DIN EN 12873-1 (2014-09): Influence of materials on drinking water - Influence due to migration - Part 1: Test method for factory-made products made of or with organic or glassy materials (enamels/enamellings); (Restriction: only test methods for factory-made products made of or with organic materials) | |||||
| DIN EN 1420 (2016-05): Influence of organic materials on water intended for human consumption - Determination of odor and taste of water in piping systems (Restriction: odor only) | |||||